2013/12/10 A New Cable Assembly for the Powered Access Stairway Is Now Used on Certain Off-Highway Trucks {7254} Caterpillar


A New Cable Assembly for the Powered Access Stairway Is Now Used on Certain Off-Highway Trucks {7254}
`
2013/12/10 [SEPD1708]
FRAME AND BODY
LADDER GP
2013/12/10 A New Cable Assembly for the Powered Access Stairway Is Now Used on Certain Off-Highway Trucks {7254}
OEM:
AVS WDS (S/N: M3J1-UP)
Off-Highway Truck:
785D (S/N: DMC1-UP; MSY1-UP)
789D (S/N: SPD1-UP; SHH1-UP)
793D (S/N: FDB1-UP)
793F AC (S/N: EMD1-UP)
793F (S/N: SND1-UP; SSP1-UP; RBT1-UP)
795F AC (S/N: ERM1-UP)
797F (S/N: LAJ1-UP; WSP1-UP)

Description of Change: The control cable and mounting group has been updated with a new cable assembly for the machines listed above. The new cable assembly uses stainless steel components and protective boots. The new components will help prevent contamination and increase the service life of the control cable and mounting group.

Adaptable To:

Table 1
New Parts List    
Item     Qty     Part Number     Description    
1     1     448-1317 (1)     Cable As    
2     1     448-1320     Boot    
3     4     9S-1354     Nut    
4     2     3S-2093     Cable Strap    
5     1     448-1319     Boot    
( 1 ) Use 448-1318 only for SHH1-UP machines



Illustration 1g03507387

New cable assembly (1) replaces the former 7T-9575 Cable As in the 354-0517 Control Cable and Mounting Gp. The 354-0517 Control Cable and Mounting Gp is a part of stairway arrangement.

The new 448-1318 Cable As replaces the former 7T-9575 Cable As in the 375-2031 Control Cable and Mounting Gp for machines SHH1-UP.

Use hardware that is listed in Table 1 to install the new cable assembly in the control cable and mounting group.

New cable assembly is adaptable to machines and effective in production with machines that are listed in Table 2.

Table 2
Sales Model     Adaptable to Machines     Effective in Production with Machines    
785D     S/N:MSY1-621     S/N:MSY622-UP    
S/N:DMC1-173 S/N:DMC174-UP    
789D     S/N:SPD1-614     S/N:SPD615-UP    
S/N:SHH1-319 S/N:SHH320-UP    
793D     S/N:FDB1-1813     S/N:FDB1814-UP    
793F     S/N:SSP1-1003     S/N:SSP1004-UP    
S/N:EMD1-77 S/N:EMD78-UP    
S/N:RBT1-171 S/N:RBT172-UP    
S/N:SND1-131 S/N:SND132-UP    
795F     S/N:ERM1-288     S/N:ERM289-UP    
797F     S/N:LAJ1-494     S/N:LAJ495-UP    
S/N:WSP1-124 S/N:WSP125-UP    
AVS WDS     S/N:M3J1-114     S/N:M3J115-UP    

Information System:

3512B and 3516B Generator Set Engines with Dynamic Gas Blending Water Temperature Regulator
794 AC, 796 AC, and 798 AC Off-Highway Truck Electronic Control System Diagnostic Trouble Codes
2014/01/13 New Jacket Water Heater Groups Are Used on Certain 3500 Engines {1383}
C4.4 Industrial Engine Coolant (ELC) - Change
12M Series 3, 140M Series 3, 160M Series 3, 140, 150 and 160 Motor Graders Diagnostic Trouble Codes
Three60 Precision Control System Configuration Parameters
C13 and C15 Generator Sets Refill Capacities
Installation Procedure For The Improved 377-2167 Water Lines Gp {1380}
2013/10/31 Improved Water Lines Group For Certain G3520B Engines {1380}
2013/11/13 Cylinder Head Gasket Torque Procedures for Certain 3500 Engines {1100, 1124}
2013/11/12 Cylinder Head Gasket Torque Procedures for Certain3500 Machine Engines {1100, 1124}
C32 Marine Generator Set Maintenance Interval Schedule
Procedure for Removing and Installing the Exhaust Cooler (NRS) on All Tier 4 C15 and C18 Engines {108C, 108G}
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Radiator
2013/10/24 New Software for the Turbocharger Protection Strategy on the C4.4 Engine {1052, 1920}
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Air Shutoff
2013/11/04 New Procedure for Mounting Space Heater Is Now Available for Certain Cat Engines and Generator Sets {4450}
12M Series 3, 140M Series 3, 160M Series 3, 140, 150 and and 160 Motor Graders Control Manifold (Brake)
12M Series 3, 140M Series 3, 160M Series 3, 140, 150 and and 160 Motor Graders Control Manifold (Hydraulic Fan)
14L Motor Grader Machine Systems Cab - Install
14L Motor Grader Machine Systems Cab - Remove
2015/01/30 New Oil Temperature Sensor and Harness Are Used On Certain 3500B and 3500C Engines {1408, 1929}
EMCP4.1/EMCP4.2 Integrated Voltage Regulator Connections
2013/10/31 Major Engine Overhaul Foundational Kits Are Available for 3406 Marine Engines {1000}