Solenoid Valve (DEF Air) - Remove and Install
`
C280-08 Tier 4 Engine
[UENR6579]
C280-08 Tier 4 Engine
Regulator (DEF Air) - Remove and Install
C280-08 Tier 4 Engine
Pressure Sensor (Diesel Exhaust Fluid) - Remove and Install
ELECTRICAL AND STARTING SYSTEM
SOLENOID GP
C280-08 Tier 4 Engine
Solenoid Valve (DEF Air) - Remove and Install
C280-08 Tier 4 Engine
Solenoid Valve (DEF Return) - Remove and Install
C280-08 Tier 4 Engine
Solenoid Valve (DEF Supply) - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 207-1601 | Rubber Lubricant | - |
- Turn off the air supply to the dosing cabinet.
Show/hide table
Illustration 1 g03498659 - Remove panel (1).
Show/hide table
Illustration 2 g03498860 - Disconnect harness assembly (3). Remove cable strap (2).
- Remove solenoid (4).
Show/hide table
Illustration 3 g03498870 - Remove O-ring seals (5) and (6).
- Install solenoid (4) in the reverse order of removal.
- Use Tooling (A) to lubricate O-ring seals (5) and (6).
- Tighten solenoid (4) to a torque of
60 ± 5 N·m (44 ± 4 lb ft) .
Information System:
C280-08 Tier 4 Engine
Regulator (DEF Air) - Remove and Install
2013/10/28
Engine ECM Clearing Process for Dealers Is Now Available on Certain Applications {1901, 1920}
14L Motor Grader
Air Cleaner - Remove and Install
C280-08 Marine Engine
General Hazard Information
C280-08 Marine Engine
Burn Prevention
C280-08 Marine Engine
Before Starting Engine
C280-08 Marine Engine
Alarms and Shutoffs
C280-12 Marine Engine
Product Storage
C4.4 Industrial Engine
Engine Air Cleaner Element (Dual Element/Canister Type) - Clean/Replace - If Equipped
C4.4 Industrial Engine
Coolant Level - Check
Selective Catalytic Reduction Retrofit Aftertreatment
General Information
770G and 772G Off-Highway Truck Systems
Pump and Motor (Parking Brake Release, Secondary Steering)
14L Motor Grader
Clean Emissions Module - Remove and Install
2013/11/04
New Ferrite Bead and Relay Harness Is Now Available For Certain Generator Sets Equipped With PL421 {4450, 7606}
C280-08 Tier 4 Engine
Pressure Sensor (Diesel Exhaust Fluid) - Remove and Install
14L Motor Grader
Solenoid Valve (ARD Fuel) - Remove and Install - Main
C280-08 Tier 4 Engine
Solenoid Valve (DEF Return) - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Engine Overspeeds
C8.7 and C12.9 Marine Engines
Engine Vibration Is Excessive
C7 and C9 Industrial Engines
Exhaust Has Excessive Black Smoke
14L Motor Grader
Solenoid Valve (ARD Fuel) - Remove and Install - Pilot
14L Motor Grader
Temperature Sensor (Catalyst Inlet) - Remove and Install
C7 and C9 Industrial Engines
Power Is Intermittently Low or Power Cutout Is Intermittent
14L Motor Grader
Engine - Remove and Install