14L Motor Grader Machine Systems Steering Control Valve (with Secondary Steering) - Install Caterpillar


Steering Control Valve (with Secondary Steering) - Install
`
1.1. Installation Procedure

Installation Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
311-1362  Vacuum Gauge Gp 


    Illustration 1g03444037

  1. Position steering control valve (15) and install bolts (14).


    Illustration 2g03443159

  2. Connect harness assemblies (13).


    Illustration 3g03444016

  3. Connect harness assembly (12).


    Illustration 4g03443157

  4. Connect harness assembly (9), (10), and (11).


    Illustration 5g03443020

  5. Install tube assemblies (7) and (8).


    Illustration 6g03442996

  6. Connect hose fitting (3) and hose assembly (5). Install tube assemblies (4) and (6).


    Illustration 7g01413659

  7. Position cover (2).

  8. Install bolts (1). Repeat this step for the opposite side of the machine.


    Illustration 8g01397769

  9. Remove Tooling (A).

End By:

  1. Disconnect the steering frame lock.

Information System:

14L Motor Grader Machine Systems Steering Control Valve (with Secondary Steering) - Remove
349F and 352F Excavators Monitoring System
374F and 390F Excavators Tool Control System System Identification
374F and 390F Excavators Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - Attachment Valves
C175-16 Locomotive Engines Coolant Sample (Level 1) - Obtain
C175-16 Locomotive Engines Coolant (ELC) - Change
CX31 and CX31 HT On-Highway Transmissions Serial Number Plate
C9 Marine Engines and C9 Marine Generator Sets Air Starting Motor - Assemble
374F and 390F Excavators Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - Main Pump Flow Limit
C175-16 Locomotive Engines Coolant (DEAC) - Change
C175-16 Locomotive Engines Aftercooler Core - Inspect/Clean/Test
374F and 390F Excavators Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - Variable Relief Valves
G3306B Gas Engines Radiator
Cat</SUP> Detect Object Detection Hardware Generation 4 for Small Off Highway Trucks, Motor Graders, Large Wheel Loaders, Large Wheel Dozers and Articulated Trucks Main Screen (with Fleet Onboard)
14L Motor Grader Machine Systems Steering Control Valve (with Secondary Steering) - Disassemble
14L Motor Grader Machine Systems Steering Control Valve (with Secondary Steering) - Assemble
2014/03/07 Improved Alternator Mounting Groups Are Now Used on Certain C15 and C18 Engines {1154, 1405}
C175-16 Locomotive Engines Engine Crankcase Breather - Clean
2013/10/17 Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Commercial Engines {1250, 1251, 1290, 1713}
2013/10/29 Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain On-Highway Truck Engines {1250, 1251, 1290, 1713}
CX31 and CX31 HT On-Highway Transmissions Oil Filter (Transmission) - Replace
C4.4 Industrial Engine Safety Messages
2013/10/11 New Side Cover and Oil Drain System Are Used on Certain 3512C Locomotive Engines {1307}
CX31 and CX31 HT On-Highway Transmissions Transmission Oil - Change