Accessory Drive (Front) - Assemble
`
3508C, 3512C and 3516C Marine Engines
[KENR6055]
3508C, 3512C and 3516C Marine Engines
Accessory Drive (Front) - Disassemble
3508C, 3512C and 3516C Marine Engines
Flywheel - Remove and Install
BASIC ENGINE
DRIVE GP-ACCESSORY
3508C, 3512C and 3516C Marine Engines
Accessory Drive (Front) - Remove
3508C, 3512C and 3516C Marine Engines
Accessory Drive (Front) - Install
3508C, 3512C and 3516C Marine Engines
Accessory Drive (Front) - Disassemble
3508C, 3512C and 3516C Marine Engines
Accessory Drive (Front) - Assemble
3508C, 3512C and 3516C Marine Engines
Accessory Drive (Front) - Disassemble - Engine Oil Pump and Water Pump
3508C, 3512C and 3516C Marine Engines
Accessory Drive (Front) - Assemble - Engine Oil Pump and Water Pump
3508C, 3512C and 3516C Marine Engines
Accessory Drive (Front) - Remove - Engine Oil Pump and Water Pump
1.1. Assembly Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 1P-0520 | Driver Group | 1 |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Align the oil hole in sleeve bearing (14) and the oil hole in adapter assembly (12). Use Tooling (A) and a suitable press to install sleeve bearing (14) into adapter assembly (12).
- Install pipe plug (11) in adapter assembly (12).
- Apply clean engine oil on sleeve bearing (14) and install shaft (15) in adapter assembly (12).
- Install thrust washer (7) and bolts (8).
- Position gear (9) on shaft (15) and install bolts (10).
- Install O-ring seal (6) and O-ring seal (13) on adapter assembly (12). Apply clean engine oil on the O-ring seals.
Show/hide table
Illustration 2 g01126654 - Align the oil hole in sleeve bearing (3) and the oil hole in adapter assembly (1). Use Tooling (A) and a suitable press to install sleeve bearing (3) into adapter assembly (1).
- Install O-ring seal (2) and O-ring seal (4) on adapter assembly (1). Apply clean engine oil on the O-ring seals.
- Install pipe plug (5) in adapter assembly (1).
Show/hide table
| |
| Illustration 1 | g01126667 |
End By:
- Install the accessory drive (front). Refer to Disassembly and Assembly, "Accessory Drive (Front) - Install".
Information System:
3508C, 3512C and 3516C Marine Engines
Accessory Drive (Front) - Disassemble
345C Excavator Machine System Specifications
Boom
345C Excavator Machine System Specifications
Final Drive
C7 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Install
C9 Marine Generator Set
Product Lifting
C32 Marine Engines
System Configuration Parameters
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers
Flash Programming
12M, 140, 140M and 160M Motor Graders Braking and Hydraulic Fan System
Brake and Hydraulic Fan System
C9 Engines for Caterpillar Built Machines
Basic Engine
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Housing (Front) - Disassemble
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Housing (Front) - Assemble
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Engine Oil Cooler - Remove and Install
3508C, 3512C and 3516C Marine Engines
Flywheel - Remove and Install
3126B Petroleum Engine
Diagnostic Code Cross Reference
12M, 140, 140M, 150, 160M and 160 Motor Graders Hydraulic and Steering System
Calibration Procedures
3508B, 3512B and 3516B Generator Set Engines
Flywheel Housing - Remove
3508B, 3512B and 3516B Generator Set Engines
Flywheel Housing - Install
2004/12/01
New Lockwasher Will Improve Varistor Reliability {4466}
C4.4 Industrial Engine
Electrical System
C11 and C13 Engines for Caterpillar Built Machines
General Information
C11 and C13 Engines for Caterpillar Built Machines
Lubrication System
G3520C and G3520E Generator Set Engines
Fuel Control Valve - Remove and Install
3126B Petroleum Engine
Injection Actuation Pressure - Test
3500 and 3500B Engines
Reference Numbers