Water Pump - Remove
`
C7 On-Highway Engine
[RENR7458]
COOLING SYSTEM
PUMP GP-WATER
C7 On-Highway Engine
Water Pump - Remove
C7 Engines for Caterpillar Built Machines
Water Pump - Assemble
1.1. Removal Procedure
Start By:
- Remove the alternator. Refer to Disassembly and Assembly, "Alternator - Remove and Install".
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Drain the coolant system. Refer to Operation and Maintenance Manual, "Refill Capacities and Recommendations".
Show/hide table
Illustration 1 g01124776 - Remove bolts (1). Remove support bracket (2).
- Disconnect hose (3).
- Remove bolts (4). Remove water pump (5).
Information System:
3500B and 3500 Marine Propulsion Engines with EUI Option
Belts - Inspect/Adjust/Replace
3500B and 3500 Marine Propulsion Engines with EUI Option
Refill Capacities and Recommendations
3500B and 3500 Marine Propulsion Engines with EUI Option
Product Lifting
C27 and C32 Engines
Fuel System Pressure - Test
2004/12/01
New Ignition Transformers are Used {1561}
345C MHPU Mobile Hydraulic Power Unit Hydraulic System
Relief Valve (Swing)
C7 On-Highway Engine
Engine Oil Filter Base and Oil Cooler - Remove
3500B High Displacement Generator Set Engines
Alternator and Fan Belts - Inspect/Adjust/Replace
C27 and C32 Engines
Water Pump - Test
3500 and 3500B Engines
Refill Capacities and Recommendations
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
3126B Petroleum Engine
Cooling System
C7 Engines for Caterpillar Built Machines
Water Pump - Assemble
3508C, 3512C and 3516C Marine Engines
Pistons and Connecting Rods - Remove
3508C, 3512C and 3516C Marine Engines
Pistons and Connecting Rods - Install
345C, 365C and 385C Excavators Air Conditioning and Heating
Air Conditioner Lines
3500 Engines
Connecting Rod Bearings - Remove and Install
854G Wheel Dozer
High Intensity Discharge Lamp (HID) - Replace - If Equipped
3508C, 3512C and 3516C Marine Engines
Crankshaft Main Bearings - Install
3508C, 3512C and 3516C Marine Engines
Crankshaft Main Bearings - Remove
C32 Marine Engines
Sensors and Electrical Connectors
345 MHPUC Mobile Hydraulic Power Unit Machine System Specifications
Relief Valve (Main) - Heavy Lift
345C Excavator Machine System Specifications
Relief Valve (Main)
2004/12/01
A New Aftercooler Cover is Now Used {1063, 1063}