Engine Oil Filter Base and Oil Cooler - Remove
`
C7 On-Highway Engine
[RENR7458]
COOLING SYSTEM
COOLER GP
C7 On-Highway Engine
Engine Oil Filter Base and Oil Cooler - Install
C7 On-Highway Engine
Engine Oil Filter Base and Oil Cooler - Remove
1.1. Removal Procedure
Removal Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 185-3630 | Strap Wrench Assembly | 1 |
- Drain the coolant system. Refer to Operation and Maintenance Manual, "Refill Capacities and Recommendations".
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "AVSpare Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on AVSpare products. Dispose of all fluids according to local regulations and mandates. |
- Remove nuts (1) . Remove bracket (2) and the hose assembly. Use Tooling (A) and remove oil filter (3) .
Show/hide table
 | |
| Illustration 1 | g01261004 |
- Remove bolts (4) . Remove engine oil filter base (5) and the gasket.
Show/hide table
 | |
| Illustration 2 | g01261010 |
- Remove oil cooler (6) and the gasket. Remove O-ring seals (7) .
Show/hide table
 | |
| Illustration 3 | g01261014 |
Information System:
3500B High Displacement Generator Set Engines
Alternator and Fan Belts - Inspect/Adjust/Replace
C27 and C32 Engines
Water Pump - Test
3500 and 3500B Engines
Refill Capacities and Recommendations
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
3126B Petroleum Engine
Cooling System
3126B Petroleum Engine
Sensors and Electrical Connectors
3508B, 3512B and 3516B Generator Set Engines
Crankshaft - Install
3508B, 3512B and 3516B Generator Set Engines
Crankshaft - Remove
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Fuel System Secondary Filter - Replace
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Fuel System - Prime
3508B, 3512B and 3516B Generator Set Engines
Engine Oil Pan - Install
3508B, 3512B and 3516B Generator Set Engines
Engine Oil Pan - Remove
345C MHPU Mobile Hydraulic Power Unit Hydraulic System
Relief Valve (Swing)
2004/12/01
New Ignition Transformers are Used {1561}
C27 and C32 Engines
Fuel System Pressure - Test
3500B and 3500 Marine Propulsion Engines with EUI Option
Product Lifting
3500B and 3500 Marine Propulsion Engines with EUI Option
Refill Capacities and Recommendations
3500B and 3500 Marine Propulsion Engines with EUI Option
Belts - Inspect/Adjust/Replace
C7 On-Highway Engine
Water Pump - Remove
C7 Engines for Caterpillar Built Machines
Water Pump - Assemble
3508C, 3512C and 3516C Marine Engines
Pistons and Connecting Rods - Remove
3508C, 3512C and 3516C Marine Engines
Pistons and Connecting Rods - Install
345C, 365C and 385C Excavators Air Conditioning and Heating
Air Conditioner Lines
3500 Engines
Connecting Rod Bearings - Remove and Install