Engine Oil Pan - Remove
`
3508B, 3512B and 3516B Generator Set Engines
[RENR5060]
3508B, 3512B and 3516B Generator Set Engines
Camshaft - Install
3508B, 3512B and 3516B Generator Set Engines
Engine Oil Pan - Install
BASIC ENGINE
PAN GP-OIL
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Engine Oil Pan - Remove
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Engine Oil Pan - Disassemble
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Engine Oil Pan - Assemble
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Engine Oil Pan - Install
3508B, 3512B and 3516B Generator Set Engines
Engine Oil Pan - Remove
3508B, 3512B and 3516B Generator Set Engines
Engine Oil Pan - Install
3500 Engines
Engine Oil Pan - Assemble
1.1. Removal Procedure
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Drain the engine oil into a suitable container for storage or for disposal.
Show/hide table
Illustration 1 g01123595 - Remove bolts (1) that hold the connector for the oil pump to engine oil pan (2).
Show/hide table
Illustration 2 g01123597 - Remove bolts (3) that connect engine oil pan (2) to the cylinder block.
Show/hide table
Improper lift rigging can allow unit to tumble causing injury and damage.
Show/hide table
Illustration 3 g01123599 - Attach a suitable lifting device to the engine lifting eyes.
- The weight of the 3508B Engine is approximately
4445 kg (9800 lb) . The weight of the oil pan is approximately240 kg (530 lb) . - The weight of the 3512B Engine is approximately
5900 kg (13,000 lb) . The weight of the oil pan is approximately295 kg (650 lb) . - The weight of the 3516B Engine is approximately
7711 kg (17,000 lb) . The weight of the oil pan is approximately409 kg (900 lb) .
- The weight of the 3508B Engine is approximately
- Lift the engine from the oil pan.
Show/hide table
Illustration 4 g01123600 - Remove oil pan gasket (4) from the engine oil pan. Remove O-ring seal (5). Remove bolts (6). Remove flange (7) from the engine oil pan. Remove seal (8) from the flange.
Information System:
C32 Marine Engines
Fuel System
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Turbocharger - Inspect - If Equipped
2004/12/01
Improved Alignment of a Coolant Tube {1380}
C9 Industrial Engines
Cooling System
C27 and C32 Engines
Finding Top Center Position for No. 1 Piston
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Engine Crankcase Breather - Replace
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Alternator and Fan Belts - Inspect/Adjust
C7 Engines for Caterpillar Built Machines
Fuel Transfer Pump - Install
C7 Engines for Caterpillar Built Machines
Fuel Transfer Pump - Remove
345C Excavator Hydraulic System
Stick Drift Reduction Valve
2004/11/01
New Injectors and New Flash Files are Now in Production {1290, 7620}
SR4 and SR4B Generators and Control Panels
Maintenance Interval Schedule - Standby
3508B, 3512B and 3516B Generator Set Engines
Engine Oil Pan - Install
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Fuel System - Prime
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Fuel System Secondary Filter - Replace
3508B, 3512B and 3516B Generator Set Engines
Crankshaft - Remove
3508B, 3512B and 3516B Generator Set Engines
Crankshaft - Install
3126B Petroleum Engine
Sensors and Electrical Connectors
3126B Petroleum Engine
Cooling System
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
3500 and 3500B Engines
Refill Capacities and Recommendations
C27 and C32 Engines
Water Pump - Test
3500B High Displacement Generator Set Engines
Alternator and Fan Belts - Inspect/Adjust/Replace
C7 On-Highway Engine
Engine Oil Filter Base and Oil Cooler - Remove