Fuel Transfer Pump - Remove
`
C15 and C18 Engines for Caterpillar Built Machines
[RENR8261]
C15 and C18 Engines for Caterpillar Built Machines
Alternator - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Electronic Unit Injector - Install
FUEL SYSTEM
PUMP GP-FUEL TRANSFER
C15 and C18 Engines for Caterpillar Built Machines
Fuel Transfer Pump - Remove
1.1. Removal Procedure
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Turn the fuel supply to the “OFF” position.
Show/hide table
Illustration 1 g01114864 - Disconnect hose assembly (2) and hose assembly (3) from the fuel transfer pump.
- Remove bolts (4).
- Remove fuel transfer pump (1) and the O-ring seal from the adapter.
Information System:
12M, 140M, 160M, 140, 150 and 160 Motor Graders Hydraulic and Steering System
Hydraulic Tank
C27 and C32 Industrial and Petroleum Engines
Flywheel Housing
390F MHPU Mobile Hydraulic Power Unit
Engine Oil Level - Check
390F MHPU Mobile Hydraulic Power Unit
Cooling System Coolant Sample (Level 1) - Obtain
C15 and C18 Engines for Caterpillar Built Machines
Fuel System
C27 and C32 Generator Set Engines
Flywheel
G3520C and G3520E Generator Set Engines
Cooling System - Landfill Application
12M, 140, 140M, 150, 160M and 160 Motor Graders Hydraulic and Steering System
Blade Cushion - If Equipped
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines
Features
3500 Engines
Water Pump - Install
3500 Engines
Water Pump - Remove
345C MHPU Mobile Hydraulic Power Unit Hydraulic System
Pilot Valve (Joystick)
C32 Commercial Engines
Heat Exchanger
3508C, 3512C and 3516C Marine Engines
Water Pump - Disassemble
3508C, 3512C and 3516C Marine Engines
Water Pump - Assemble
C27 and C32 Generator Set Engines
Electronic Unit Injector - Remove
C15 and C18 Engines for Caterpillar Built Machines
Electronic Unit Injector - Install
C27 and C32 Generator Set Engines
Electronic Unit Injector Sleeve - Remove
C9.3 Tier 4 Final Engines
Valve Mechanism
390D Excavator
Access Door and Cover Locations
G3406 and G3412 Generator Sets
Voltage Regulators
C27 and C32 Industrial and Petroleum Engines
Air Lines
2005/09/05
Improvements to Turbocharger and Exhaust Manifold Groups {1052, 1059, 1061}
3508B, 3512B and 3516B Generator Set Engines
Aftercooler - Remove and Install