Removal Procedure
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "AVSpare Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on AVSpare products. Dispose of all fluids according to local regulations and mandates. |
- Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Refill Capacities and Recommendations".
- Disconnect hose (1) and hose (4) .
 | |
| Illustration 1 | g01123347 |
- Remove bolts (3) .
- Remove transmission oil cooler (2) .
Installation Procedure
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position transmission oil cooler (2) on the engine.
| | |
| Illustration 2 | g01123347 |
- Install bolts (3) .
- Connect hose (1) and hose (4) .
- Refill the cooling system. Refer to Operation and Maintenance Manual, "Refill Capacities and Recommendations".