Valve Mechanism Cover - Remove and Install
`
C12 Marine Engines
[RENR9405]
C12 Marine Engines
Vibration Damper and Pulley - Remove and Install
C12 Marine Engines
Front Cover - Remove
BASIC ENGINE
VALVE MECHANISM GP
C12 Marine Engines
Valve Mechanism Cover - Remove and Install
C12 Marine Engines
Lifter Group - Remove and Install
C12 Marine Engines
Valve Mechanism Cover Base - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure
Removal Procedure
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove bolts (1) .
Show/hide table
 | |
| Illustration 1 | g01107452 |
- Remove cover (2) .
Installation Procedure
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position cover (2) on the valve mechanism cover base.
Show/hide table
| | |
| Illustration 2 | g01107452 |
Show/hide table
 | |
| Illustration 3 | g00280493 |
- Install bolts (1). Tighten the bolts in a numerical sequence to a torque of 12 ± 3 N·m (106 ± 27 lb in).
- Tighten the bolts again in a numerical sequence to a torque of 12 ± 3 N·m (106 ± 27 lb in).
Information System:
2004/11/01
New Voltage Regulator for Switchgear Is Now Used {1410}
390F MHPU Mobile Hydraulic Power Unit
Cooling System Coolant Extender (ELC) - Add
C12 Marine Engines
Vibration Damper and Pulley - Remove and Install
C12 Marine Engines
Flywheel - Remove and Install
C12 Marine Engines
Expansion Tank - Remove and Install
C12 Marine Engines
Aftercooler - Install
G3516C and G3516E Gas Engines
Camshaft
G3520C and G3520E Engines
Camshaft
G3516C and G3516E Gas Engines
Camshaft
C12 Marine Engines
Aftercooler - Remove
G3516C and G3516E Gas Engines
Camshaft
C12 Marine Engines
Auxiliary Water Pump - Remove
C12 Marine Engines
Front Cover - Remove
C12 Marine Engines
Front Cover - Install
C12 Marine Engines
Camshaft - Remove
C12 Marine Engines
Camshaft - Install
C12 Marine Engines
Engine Oil Pan - Remove and Install
C12 Marine Engines
Cylinder Liner - Remove
C12 Marine Engines
Cylinder Liner - Install
C12 Marine Engines
Pistons and Connecting Rods - Disassemble
C12 Marine Engines
Pistons and Connecting Rods - Assemble
C12 Marine Engines
Pistons and Connecting Rods - Install
C12 Marine Engines
Connecting Rod Bearings - Install
C12 Marine Engines
Crankshaft Main Bearings - Remove