Aftercooler - Remove
`
C12 Marine Engines
[RENR9405]
AIR INLET AND EXHAUST SYSTEM
AFTERCOOLER GP
C12 Marine Engines
Aftercooler - Remove
C12 Marine Engines
Aftercooler - Install
1.1. Removal Procedure
Removal Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 138-7573 | Link Bracket | 2 |
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "AVSpare Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on AVSpare products. Dispose of all fluids according to local regulations and mandates. |
- Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Refill Capacities and Recommendations".
- Disconnect tube assembly (2) and tube assembly (4) .
Show/hide table
 | |
| Illustration 1 | g01106938 |
- Disconnect tube assembly (3) and tube assembly (5) .
- Disconnect tube assembly (6) .
- Attach Tooling (A) and a suitable lifting device to aftercooler core (1) . The weight of the aftercooler core is approximately 36 kg (80 lb).
- Remove bolts (8) .
- Remove cover (7) .
- Remove aftercooler core (1) and the gaskets.
- Remove bolts (9) , bolts (11) , and bolts (12) .
Show/hide table
 | |
| Illustration 2 | g01106947 |
- Remove housing (10) .
Information System:
G3516C and G3516E Gas Engines
Camshaft
C12 Marine Engines
Auxiliary Water Pump - Remove
C12 Marine Engines
Water Outlet Manifold - Remove
C12 Marine Engines
Water Temperature Regulator - Remove and Install
2004/10/01
A New Fuel Transfer Pump is Used {1256}
C12 Marine Engines
Water Pump - Assemble
C12 Marine Engines
Water Pump - Disassemble
C12 Marine Engines
Water Pump - Remove
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys
Specifications
C13 and C15 Engines for Combat and Tactical Vehicles
PTO Shutdown Timer - Test
C13 and C15 Engines for Combat and Tactical Vehicles
Output Selections
C12 Marine Engines
Engine Oil Cooler - Remove
G3516C and G3516E Gas Engines
Camshaft
G3520C and G3520E Engines
Camshaft
G3516C and G3516E Gas Engines
Camshaft
C12 Marine Engines
Aftercooler - Install
C12 Marine Engines
Expansion Tank - Remove and Install
C12 Marine Engines
Flywheel - Remove and Install
C12 Marine Engines
Vibration Damper and Pulley - Remove and Install
390F MHPU Mobile Hydraulic Power Unit
Cooling System Coolant Extender (ELC) - Add
2004/11/01
New Voltage Regulator for Switchgear Is Now Used {1410}
C12 Marine Engines
Valve Mechanism Cover - Remove and Install
C12 Marine Engines
Front Cover - Remove
C12 Marine Engines
Front Cover - Install