EMCP4.1/EMCP4.2 Integrated Voltage Regulator Connections Caterpillar


Integrated Voltage Regulator Connections
`
EMCP4.1/EMCP4.2 [UENR1209]
ELECTRICAL AND STARTING SYSTEM
REGULATOR GP-VOLTAGE
EMCP4.1/EMCP4.2 Integrated Voltage Regulator
EMCP4.1/EMCP4.2 Integrated Voltage Regulator Connections
1.1. EM10 IVR Connections
2.2. EM10 Self-Excitation (SHUNT)
3.2. EM10 Auxiliary Winding (Internal) Excitation (AREP/IE) 4-Wire
4.2. EM10 Auxiliary Winding (Internal) Excitation (AREP/IE), 3-wire
5.2. EM10 Permanent Magnet Excitation (PM)
6.1. EM15 IVR Connections
7.2. EM15 Self-Excitation (SHUNT)
8.2. EM15 Auxiliary Winding (Internal) Excitation (AREP/IE) 4-Wire
9.2. EM15 Auxiliary Winding (Internal) Excitation (AREP/IE), 3-wire
10.2. EM15 Permanent Magnet Excitation (PM)

EM10 IVR Connections

EM10 Self-Excitation (SHUNT)



Illustration 1g03501363

EM10 Auxiliary Winding (Internal) Excitation (AREP/IE) 4-Wire



Illustration 2g03501365

EM10 Auxiliary Winding (Internal) Excitation (AREP/IE), 3-wire



Illustration 3g03501366

EM10 Permanent Magnet Excitation (PM)



Illustration 4g03501369

EM15 IVR Connections

EM15 Self-Excitation (SHUNT)



Illustration 5g03501375

EM15 Auxiliary Winding (Internal) Excitation (AREP/IE) 4-Wire



Illustration 6g03501376

EM15 Auxiliary Winding (Internal) Excitation (AREP/IE), 3-wire



Illustration 7g03501378

EM15 Permanent Magnet Excitation (PM)



Illustration 8g03501379

Information System:

2015/01/30 New Oil Temperature Sensor and Harness Are Used On Certain 3500B and 3500C Engines {1408, 1929}
14L Motor Grader Machine Systems Cab - Remove
14L Motor Grader Machine Systems Cab - Install
12M Series 3, 140M Series 3, 160M Series 3, 140, 150 and and 160 Motor Graders Control Manifold (Hydraulic Fan)
12M Series 3, 140M Series 3, 160M Series 3, 140, 150 and and 160 Motor Graders Control Manifold (Brake)
2013/11/04 New Procedure for Mounting Space Heater Is Now Available for Certain Cat Engines and Generator Sets {4450}
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Air Shutoff
2013/10/24 New Software for the Turbocharger Protection Strategy on the C4.4 Engine {1052, 1920}
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Radiator
Procedure for Removing and Installing the Exhaust Cooler (NRS) on All Tier 4 C15 and C18 Engines {108C, 108G}
2013/12/10 A New Cable Assembly for the Powered Access Stairway Is Now Used on Certain Off-Highway Trucks {7254}
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Water Temperature Regulator
2013/10/31 Major Engine Overhaul Foundational Kits Are Available for 3406 Marine Engines {1000}
2013/10/31 Top End and Major Engine Overhaul Foundational Kits Are Available for 3512 Petroleum Engines {1000}
374F Excavator Machine System Air Cleaner
374F Excavator Machine System Cab
C280-08 Marine Engine Symbols
2014/05/20 An Improved Water Pump Seal Assembly Is Used on Certain Commercial Engines {1361, 7555}
XQC1600 Power Module Generator Operation
XQC1600 Power Module Fuel Related Components in Cold Weather
C280-08 Marine Engine Exhaust Outlet Nitrogen Oxide Sensor - Replace
XQC1600 Power Module Setup
2013/10/29 The Clamp Assembly for Muffler Has Been Improved On Certain C Series and D Series Excavators {1062}
2013/11/04 A New Water Pump Seal is Used on Certain C18 Marine Engines Equipped with the Bronze Impeller Auxiliary Pump {1361}