System Identification
`
374F and 390F Excavators Tool Control System
[KENR9616]
374F and 390F Excavators Tool Control System
Solenoid Valve (Proportional Reducing) - Calibrate - Attachment Valves
374F and 390F Excavators Tool Control System
Switches
HYDRAULIC SYSTEM
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System
Control (Thumb Wheel) - Calibrate
374F and 390F Excavators Tool Control System
General Information
374F and 390F Excavators Tool Control System
Solenoid Valve (Proportional Reducing) - Calibrate - Variable Relief Valves
374F and 390F Excavators Tool Control System
Solenoid Valve (Proportional Reducing) - Calibrate - Main Pump Flow Limit
374F and 390F Excavators Tool Control System
Solenoid Valve (Proportional Reducing) - Calibrate - Attachment Valves
374F and 390F Excavators Tool Control System
System Identification
374F and 390F Excavators Tool Control System
Combined Function - Electric Control
1.1. System Identifiers
2.2. Combined Function - Electric Control
3.2. One-Way / Two Pumps - Electric Control
4.2. Medium Pressure Hydraulic System
Use the following information to identify the tool control system on the machine.
Component configuration per the name of the tool control system is described in Table 1.
Show/hide table
| Identification for the Tool Control System | |||||
|---|---|---|---|---|---|
| Tool Control System | Engineering Nomenclature | Machine Application(1) | Control Device | Tool Relief Valve | Comparable E-Series Tool Control System |
| Combined Function with Medium Pressure - Electric Control | Tool A0M | "Multi-Proc - Electrical" | Electric Control(2) | Electric | Tool 20 |
| Combined Function without Medium Pressure - Electric Control | Tool A0 | "Common Electrical" | Electric Control(2) | Electric | Tool 20 |
| One Way - Two Pumps - Electric Control | Tool A1 | "Hammer Electrical" | Electric Control(2) | Mechanical | Tool 21 |
| Medium Pressure | Medium Pressure | "Front Pump - Electrical" | Electric Control | Mechanical | Medium Pressure |
Show/hide table
| (1) | Monitor Setup Option > "Service" > "Configurations" > "Aux Hyd Attachment" > "Machine Application" |
| (2) | Joystick with Thumb Wheel, Electric Foot Pedal |
The tool systems can be identified based on the number and type of components on the machine.
Combined Function - Electric Control
A machine configured with a Combined Function with Electric Control will have the following components:
- Two variable relief valves located in the swing motor compartment above the boom foot.
- Attachment independent metering valve (IMV) on top of main control valve
- ACS ECM 3 located on the main control valve
- Electric controls in the cab
Refer to Illustrations 1, 2, and 3 for component descriptions.
Show/hide table
| |
| Illustration 1 | g03587125 |
|
Two Variable Reliefs located above the boom foo (typical examples) | |
Show/hide table
| |
| Illustration 2 | g03584745 |
|
Attachment IMV section and attachment ECM 3 | |
Show/hide table
| |
| Illustration 3 | g03583340 |
|
Electric Control in the cab (A) Joysticks with thumb wheel (B) Left hand electric foot pedal (C) Right hand electric foot pedal | |
One-Way / Two Pumps - Electric Control
A machine configured with a One-Way flow from Two Pumps with Electric Control will have the following components:
- One mechanical relief valve located in the swing motor compartment above the boom foot.
- Electric controls in the cab
Refer to Illustrations 4 and 5 for component descriptions.
Show/hide table
| |
| Illustration 4 | g03618842 |
|
Mechanical Tool Relief located above the boom foot | |
Show/hide table
| |
| Illustration 5 | g03583249 |
|
Electric Controls in the cab (A) Joysticks with thumb wheel (B) Left hand electric foot pedal (C) Right hand electric foot pedal | |
Medium Pressure Hydraulic System
A machine configured with a Medium Pressure system is only found on machines with Combined Function with Electric Control and will have the following components:
- Medium Pressure control valve located in the swing motor compartment.
- Two proportional reducing valves located in front of the medium pressure control valve.
- Electric control in the cab.
Refer to Illustration 6 and 7 for component descriptions.
Show/hide table
| |
| Illustration 6 | g03587165 |
|
Medium pressure valve with proportional reducing valves for control located in the swing motor compartment attached to the hydraulic tank | |
Show/hide table
| |
| Illustration 7 | g03584108 |
|
Electric Control in the cab (A) Joysticks with thumb wheel (B) Left hand electric foot pedal | |
Information System:
374F and 390F Excavators Tool Control System
Solenoid Valve (Proportional Reducing) - Calibrate - Attachment Valves
C175-16 Locomotive Engines
Coolant Sample (Level 1) - Obtain
C175-16 Locomotive Engines
Coolant (ELC) - Change
CX31 and CX31 HT On-Highway Transmissions
Serial Number Plate
C9 Marine Engines and C9 Marine Generator Sets
Air Starting Motor - Assemble
374F and 390F Excavators Tool Control System
Solenoid Valve (Proportional Reducing) - Calibrate - Main Pump Flow Limit
C175-16 Locomotive Engines
Coolant (DEAC) - Change
C175-16 Locomotive Engines
Aftercooler Core - Inspect/Clean/Test
374F and 390F Excavators Tool Control System
Solenoid Valve (Proportional Reducing) - Calibrate - Variable Relief Valves
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit
Window Wiper Delay - Test
374F and 390F Excavators Tool Control System
General Information
349F and 352F Excavators
Monitoring System
14L Motor Grader Machine Systems
Steering Control Valve (with Secondary Steering) - Remove
14L Motor Grader Machine Systems
Steering Control Valve (with Secondary Steering) - Install
G3306B Gas Engines
Radiator
Cat</SUP> Detect Object Detection Hardware Generation 4 for Small Off Highway Trucks, Motor Graders, Large Wheel Loaders, Large Wheel Dozers and Articulated Trucks
Main Screen (with Fleet Onboard)
14L Motor Grader Machine Systems
Steering Control Valve (with Secondary Steering) - Disassemble
14L Motor Grader Machine Systems
Steering Control Valve (with Secondary Steering) - Assemble
2014/03/07
Improved Alternator Mounting Groups Are Now Used on Certain C15 and C18 Engines {1154, 1405}
C175-16 Locomotive Engines
Engine Crankcase Breather - Clean
2013/10/17
Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Commercial Engines {1250, 1251, 1290, 1713}
2013/10/29
Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain On-Highway Truck Engines {1250, 1251, 1290, 1713}
CX31 and CX31 HT On-Highway Transmissions
Oil Filter (Transmission) - Replace