Water Pump - Test
`
C27 and C32 Engines
[RENR9968]
C27 and C32 Engines
Finding Top Center Position for No. 1 Piston
C27 and C32 Engines
Fuel System Pressure - Test
COOLING SYSTEM
Show/hide table
| Tools Needed | ||
| Part Number | Part Name | Quantity |
| 6V-7775 | Air Pressure Gauge | 1 |
Show/hide table
| |
| Illustration 1 | g01124406 |
|
(1) Water manifold
(2) Plug | |
Show/hide table
 |
|
Making contact with a running engine can cause burns from hot parts and can cause injury from rotating parts. When working on an engine that is running, avoid contact with hot parts and rotating parts. |
Perform the following procedure in order to determine if the water pump is operating correctly:
- Remove plug (2) from water manifold (1).
- Install the 6V-7775 Air Pressure Gauge in the port.
- Start the engine. Run the engine until the coolant is at operating temperature.
- Note the water pump pressure. The water pump pressure should be at least
100 kPa (15 psi) at rated speed.
Information System:
3500 and 3500B Engines
Refill Capacities and Recommendations
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
3126B Petroleum Engine
Cooling System
3126B Petroleum Engine
Sensors and Electrical Connectors
3508B, 3512B and 3516B Generator Set Engines
Crankshaft - Install
3508B, 3512B and 3516B Generator Set Engines
Crankshaft - Remove
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Fuel System Secondary Filter - Replace
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Fuel System - Prime
3508B, 3512B and 3516B Generator Set Engines
Engine Oil Pan - Install
3508B, 3512B and 3516B Generator Set Engines
Engine Oil Pan - Remove
C32 Marine Engines
Fuel System
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Turbocharger - Inspect - If Equipped
3500B High Displacement Generator Set Engines
Alternator and Fan Belts - Inspect/Adjust/Replace
C7 On-Highway Engine
Engine Oil Filter Base and Oil Cooler - Remove
345C MHPU Mobile Hydraulic Power Unit Hydraulic System
Relief Valve (Swing)
2004/12/01
New Ignition Transformers are Used {1561}
C27 and C32 Engines
Fuel System Pressure - Test
3500B and 3500 Marine Propulsion Engines with EUI Option
Product Lifting
3500B and 3500 Marine Propulsion Engines with EUI Option
Refill Capacities and Recommendations
3500B and 3500 Marine Propulsion Engines with EUI Option
Belts - Inspect/Adjust/Replace
C7 On-Highway Engine
Water Pump - Remove
C7 Engines for Caterpillar Built Machines
Water Pump - Assemble
3508C, 3512C and 3516C Marine Engines
Pistons and Connecting Rods - Remove
3508C, 3512C and 3516C Marine Engines
Pistons and Connecting Rods - Install