CX31-P600 Petroleum Transmission Transmission Hydraulic Control - Side PTO, No Retarder Caterpillar


Transmission Hydraulic Control - Side PTO, No Retarder
`


Illustration 1g03481616
Left side view

Table 1
Specification for 389-3790 Transmission Hydraulic Control Gp 
Item  Qty  Part  Specification Description 
236-6222 Speed Sensor Gp  Torque bolt to 20 ± 5 N·m (15 ± 4 lb ft)
214-2485 Speed Sensor Gp  Torque to 20 ± 5 N·m (15 ± 4 lb ft)
8T-6912 Bolt  Torque to 28 ± 7 N·m (21 ± 5 lb ft)
8T-4136 Bolt  Torque to 28 ± 7 N·m (21 ± 5 lb ft)
8T-4189 Bolt  Torque to 28 ± 7 N·m (21 ± 5 lb ft)
197-4652 Relief Valve  Lubricate the bore lightly with the lubricant that is being sealed. 
276-4166 Flow Control Valve As  Lubricate the bore lightly with the lubricant that is being sealed.
Torque to 48 ± 3 N·m (35 ± 2 lb ft)
353-5126 Plug As  Torque to 40 ± 6 N·m (30 ± 4 lb ft)


Illustration 2g03517577
Rear view

Table 2
Item  Qty  Part  Specification Description 
236-6222 Speed Sensor Gp  Torque bolt to 20 ± 5 N·m (15 ± 4 lb ft)
5W-8591 Bolt  Torque to 20 ± 5 N·m (15 ± 4 lb ft)
10  234-5013 Temperature Sensor Gp  Torque to 20 ± 3 N·m (15 ± 2 lb ft)


Illustration 3g03481625
Bottom view

Table 3
Item  Qty  Part  Specification Description 
10  234-5013 Temperature Sensor Gp  Torque to 20 ± 3 N·m (15 ± 2 lb ft)
11  12  8T-4908 Bolt  Torque to 30 ± 4 N·m (22 ± 3 lb ft)
12  096-5866 Bolt  Torque to 30 ± 4 N·m (22 ± 3 lb ft)
13  162-0177 Plug As  Torque to 45 ± 7 N·m (33 ± 5 lb ft)
14  164-5567 Quick Disconnect Coupler As  Torque to 24 ± 3 N·m (18 ± 2 lb ft)
15  12  285-9066 Bolt  Torque to 30 ± 4 N·m (22 ± 3 lb ft)
16  183-3409 Plug As  Torque to 10 ± 2 N·m (89 ± 18 lb in)

Information System:

390F Excavator Machine Systems Swing System
2013/10/28 Caterpillar Marine Engine - Proper Operation "Quick Reference" {1000}
CX31-P600 Petroleum Transmission Transmission Hydraulic Control - Side PTO, Retarder
C4.4 Industrial Engine Fluid Recommendations - Engine Oil
C4.4 Industrial Engine Maintenance Interval Schedule
C32 Marine Engine Maintenance Interval Schedule
C4.4 Industrial Engine Refill Capacities
C18 Generator Set Coolant - Change
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies General Hazard Information
C18 Marine Engine Refill Capacities
C32 Marine Generator Set Refill Capacities
C8.7 Marine Engine Sensors and Electrical Components
2014/07/18 New Power Distribution Panel Groups are Used On Certain Tier 2 3508, 3512, and 3516 Marine Engines {4493, 7451, 7490}
G3500J Petroleum Engines Engine Oil Filter
G3306B Petroleum Generator Set Engines Timing - Calibrate
3500 Engines Flywheel Housing
C18 Marine Engines Refill Capacities
794 AC, 796 AC, and 798 AC Off-Highway Truck Electronic Control System System Schematic
306, 306 CR, and 306.5 Mini Hydraulic Excavators High Pressure Fuel Lines
320D2 Excavator Machine Electronic Control System Service Tools
306, 306 CR, and 306.5 Mini Hydraulic Excavators Final Drive Oil - Change
320D2 Excavator Machine Electronic Control System Diagnostic Capabilities
C13 and C15 Generator Sets Safety Messages
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Electrical Connections