793F, 793F CMD Off-Highway Truck Braking System Control Valve (Brake) - If Equipped Caterpillar


Control Valve (Brake) - If Equipped
`


Illustration 1g06539244

Table 1
Item  Qty  Part  Specification Description 
435-1455 Shuttle Valve Gp  Torque to 10.8 to 14.9 N·m (95.6 to 131.9 lb in)
156-5970 Nut  Torque to 8.1 to 10.8 N·m (71.7 to 95.6 lb in)
285-5629 Solenoid Valve Gp  Torque to 69.1 to 74.6 N·m (51.0 ± 55.0 lb ft)
Tighten the nut to 13.6 to 19.0 N·m (120.4 to 168.2 lb in)
445-8089 Relief Valve Gp  Torque to 169.5 ± 6.8 N·m (125.0 ± 5.0 lb ft)
424-0342 Control Valve Gp  Torque to 61.0 to 67.8 N·m (45.0 to 50.0 lb ft)
Torque to 20 ± 2 N·m (177 ± 18 lb in)
279-6527 Solenoid Valve Gp  Torque to 35 ± 3 N·m (26 ± 2 lb ft)
156-5970 Nut  Torque to 8.1 to 10.8 N·m (71.7 ± 95.6 lb in)
10  488-3071 Solenoid Valve Gp  Torque to 69.1 to 74.6 N·m (51.0 to 55.0 lb ft)
11  163-1829 Check Valve Gp  Torque to 175 to 194 N·m (129 to 143 lb ft)
12  Tighten the nut to 13.6 to 19.0 N·m (120.4 to 168.2 lb in)
13  294-9047 Pressure Reducing Valve Gp  Torque to 101.7 ± 6.8 N·m (75.0 ± 5.0 lb ft)
14  417-3133 Plug As  Torque to 142.4 ± 6.8 N·m (105.0 ± 5.0 lb ft)
15  343-3182 Diverter Valve Gp  Torque to 81.3 to 90.8 N·m (60.0 to 67.0 lb ft)
16  294-9048 Valve Cartridge As  Torque to 69.1 to 74.6 N·m (51.0 to 55.0 lb ft)
17  343-3185 Diverter Valve Gp  Torque to 237 to 264 N·m (175 to 195 lb ft)
18  370-8748 Orifice Assembly  Torque to 5.4 to 8.1 N·m (47.8 to 71.7 lb in)
19  156-5970 Nut  Torque to 8.1 to 10.8 N·m (71.7 to 95.6 lb in)
20  469-5153 Solenoid Valve Gp  Torque to 43.4 to 48.8 N·m (32.0 to 36.0 lb ft)

Information System:

793F, 793F CMD Off-Highway Truck Braking System Control Valve (Brake) - If Equipped
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
C15 and C18 Engines for Caterpillar Built Machines Injector Trim File - Install
C8.7 Marine Engine Refill Capacities
C8.7 Marine Engine Product Description
3600 and C280 Diesel Engine Fluids Recommendations Contamination Control
C8.7 Marine Engine Model View Illustrations
14L Motor Grader Rear Axle, Differential and Final Drive - Remove
14L Motor Grader Rear Axle, Differential and Final Drive - Install
14L Motor Grader Gear Pump (Transmission Charging and Scavenge) - Install
14L Motor Grader Rear Axle, Differential and Final Drive - Disassemble
14L Motor Grader Gear Pump (Transmission Charging and Scavenge) - Remove
C12.9 Marine Engines Fuel System Primary Filter (Water Separator) Element - Replace
CX31-P600 Petroleum Transmission Transmission Hydraulic Control
C175-16 Engine Maintenance Interval Schedule
UPS 750 Uninterruptible Power Supply System Overview
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
316F Excavator Operator Controls
2013/10/03 New Software for the Turbocharger Protection Strategy on C7.1 Engines {1052, 1901, 1920}
C8.7 Marine Engine Safety Messages
3512E Tier 4 Final Engines for Land Electric Drilling Fuel Temperature Is High
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Sensor Supply - Test
C11 and C13 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston