EPC Parts Catalogs

345C Excavator Machine System Specifications Hydraulic Tank and Filter Caterpillar


  1. Home
  2. Specifications
  3. #168596
Hydraulic Tank and Filter
`
345C Excavator Machine System Specifications [RENR7323]
345C Excavator Machine System Specifications Relief Valve (Main)
345C Excavator Machine System Specifications Final Drive
Show/hide table
Illustration 1g02889758

Show/hide table
Table 1
Specification for 227-0431 Hydraulic Tank and Filter Gp 
Item  Qty  Part  Specification Description 
1  1  207-6403 Plug  Torque to 68 ± 7 N·m (50 ± 5 lb ft). 
2  16  8T-4194 Bolt  Torque to 50 ± 10 N·m (37 ± 7 lb ft). 
3  1  347-6081 Sight Gauge Gp  Before mounting the sight gauge group, the threads of the boss of the sight gauge group must be clean.
Tighten two 236-3259 Special Bolt to 6 ± 1 N·m (53 ± 9 lb in). 
4  1  342-2924 Temperature Sender As  Torque to 34 ± 5 N·m (301 ± 44 lb in). 
5  4  170-8553 Bolt  Torque to 50 ± 10 N·m (37 ± 7 lb ft). 
6  1  170-9419 Pressure Switch  Torque to 72 ± 7 N·m (53 ± 5 lb ft). 
Show/hide table
Illustration 2g02889765

Show/hide table
Table 2
7  1  213-0677 Liquid Level Switch  Torque to 120 ± 29 N·m (89 ± 21 lb ft). 
8  1  6I-0723 Oil Drain Plug  Torque to 110 ± 15 N·m (81 ± 11 lb ft). 
9  1  8T-6761 Pipe Plug  Torque to 90 ± 8 N·m (66 ± 6 lb ft). 
Show/hide table
Illustration 3g02889766

Show/hide table
Table 3
10  4  8T-4908 Bolt  Torque to 26 ± 3 N·m (230 ± 27 lb in). 
11  6  8T-4136 Bolt  Torque to 30 ± 7 N·m (266 ± 62 lb in). 
12  1  164-5567 Quick Disconnect Coupler As  Torque to 31 ± 3 N·m (274 ± 27 lb in). 
13  1  164-5590 Fluid Sampling Valve As  Torque to 14.5 ± 1.5 N·m (128.3 ± 13.3 lb in). 

Information System:

2004/12/01 A New Aftercooler Cover is Now Used {1063, 1063}
345C Excavator Machine System Specifications Relief Valve (Main)
345 MHPUC Mobile Hydraulic Power Unit Machine System Specifications Relief Valve (Main) - Heavy Lift
C32 Marine Engines Sensors and Electrical Connectors
3508C, 3512C and 3516C Marine Engines Crankshaft Main Bearings - Remove
3508C, 3512C and 3516C Marine Engines Crankshaft Main Bearings - Install
854G Wheel Dozer High Intensity Discharge Lamp (HID) - Replace - If Equipped
3500 Engines Connecting Rod Bearings - Remove and Install
345C, 365C and 385C Excavators Air Conditioning and Heating Air Conditioner Lines
3508C, 3512C and 3516C Marine Engines Pistons and Connecting Rods - Install
3508C, 3512C and 3516C Marine Engines Pistons and Connecting Rods - Remove
C7 Engines for Caterpillar Built Machines Water Pump - Assemble
3500B Marine Propulsion Engines Refill Capacities and Recommendations
3508C, 3512C and 3516C Marine Engines Accessory Drive (Front) - Remove
3508C, 3512C and 3516C Marine Engines Accessory Drive (Front) - Install
C9 Marine Generator Set Plate Locations and Film Locations
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Turbocharger - Remove and Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Housing (Front) - Assemble
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Housing (Front) - Disassemble
C9 Engines for Caterpillar Built Machines Basic Engine
12M, 140, 140M and 160M Motor Graders Braking and Hydraulic Fan System Brake and Hydraulic Fan System
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Flash Programming
C32 Marine Engines System Configuration Parameters