Valve Replacement Kit - Diverter Valve and Relief Valve
`
12M, 140M, 160M, 140, 150 and 160 Motor Graders Braking and Hydraulic Fan System
[RENR8470]
12M, 140M, 160M, 140, 150 and 160 Motor Graders Braking and Hydraulic Fan System
Piston Pump (Brake, Hydraulic Fan)
12M, 140M, 160M, 140, 150 and 160 Motor Graders Braking and Hydraulic Fan System
Pump Control Valve (Brake, Hydraulic Fan)
BRAKING SYSTEM
LINES GP
12M, 140M, 160M, 140, 150 and 160 Motor Graders Braking and Hydraulic Fan System
Brake Accumulator - Charged
12M, 140M, 160M, 140, 150 and 160 Motor Graders Braking and Hydraulic Fan System
Valve Replacement Kit - Diverter Valve and Relief Valve
12M, 140M, 160M, 140, 150 and 160 Motor Graders Braking and Hydraulic Fan System
Control Manifold (Brake, Hydraulic Fan)
12M, 140M, 160M, 140, 150 and 160 Motor Graders Braking and Hydraulic Fan System
Brake Accumulator - Uncharged
12M, 140M, 160M, 140, 150 and 160 Motor Graders Braking and Hydraulic Fan System
Brake Accumulator
Show/hide table
| |
| Illustration 1 | g03232357 |
Note: This part number is a dual valve kit that consists of a diverter valve and a relief valve. These valves must be replaced as a set.
Show/hide table
| Specification for 282-5396 Modulating Valve Gp | |||
| Item | Qty | Part | Specification Description |
| Note: This kit consists of a diverter valve and a relief valve. These valves must be replaced as a set. | |||
| 1 | 1 | 282-5396 Valve Kit(1) | Lubricate O-rings with the liquid being sealed |
| Torque to |
|||
| 2 | 2 | Nuts | Torque to |
| 3 | 1 | 282-5396 Valve Kit(2) | Torque to |
Show/hide table
| (1) | Diverter valve portion. Not serviced separately. |
| (2) | Relief valve portion. Not serviced separately. |
Information System:
320B Excavator Hydraulic System
Swing Bearing Movement - Measure
C11 and C13 Engines for Caterpillar Built Machines
Engine Temperature Sensor Open or Short Circuit - Test
C12 Marine Engines
Auxiliary Water Pump - Assemble
C11 and C13 Engines for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
3508C, 3512C and 3516C Marine Engines
Rocker Shaft - Assemble
3508C, 3512C and 3516C Marine Engines
Rocker Shaft - Disassemble
C11 and C13 Engines for Caterpillar Built Machines
Engine Fan Control Solenoid Circuit - Test
C7 and C9 On-Highway Engines
0094-01 Low Fuel Pressure Warning (63)
C7 and C9 On-Highway Engines
0094-11 Low Cranking Fuel Pressure (63)
345C MHPU Mobile Hydraulic Power Unit Hydraulic System
Pilot Valve (Swing Parking Brake)
C12 Marine Engines
Auxiliary Water Pump - Disassemble
345C MHPU Mobile Hydraulic Power Unit Hydraulic System
Swing Motor
3508B, 3512B and 3516B Generator Set Engines
Cylinder Head - Remove
C11 and C13 Engines for Caterpillar Built Machines
User Defined Shutdown Input Circuit - Test
3412E Petroleum Engine
Flywheel Housing
345B Excavator Hydraulic System
Swing Bearing Movement - Measure
C-10 Petroleum Engine
Air Inlet and Exhaust System
C11 and C13 Engines for Caterpillar Built Machines
Throttle Switch Circuit - Test
365B Excavators Hydraulic System
Swing Bearing Movement - Measure
2004/11/01
Improved Mounting of the Power Distribution Box {7426}
3500 Engines
Cylinder Liner - Remove
3512B and 3516B Engines
Cylinder Liner - Install
2004/11/01
Circuit Breakers - Steps to Consider When Resetting {1420}
G3524 and G3532 Tandem Maintenance{7002}