Flywheel
`
C27 and C32 Generator Set Engines
[RENR7167]
BASIC ENGINE
FLYWHEEL GP
Show/hide table
| |
| Illustration 1 | g06228452 |
Show/hide table
| |
| Illustration 2 | g06228444 |
|
Numerical sequence | |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| 1 | - | - | Do not use a torch in order to heat the ring gear. |
| Maximum permissible temperature of the ring gear for installation onto the flywheel is |
|||
| 2 | 12 | 1N-3825 Bolt | Before assembly, lubricate the threads with clean engine oil, molybdenum disulfide, or a graphite base lubricant. |
| Use the following procedure to tighten the bolts: | |||
| Tighten the bolts to |
|||
| Again, tighten the bolts to an additional turn of 180 ± 5 degrees. | |||
| Replace all the bolts at the time of service. |
Information System:
G3520C and G3520E Generator Set Engines
Cooling System - Landfill Application
12M, 140, 140M, 150, 160M and 160 Motor Graders Hydraulic and Steering System
Blade Cushion - If Equipped
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines
Features
3500 Engines
Water Pump - Install
3500 Engines
Water Pump - Remove
345C MHPU Mobile Hydraulic Power Unit Hydraulic System
Pilot Valve (Joystick)
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines
General Information
C0.5 and C0.7 Industrial Engines
Engine Starting
320D Excavator
Boom, Stick and Bucket Operation
C27 and C32 Generator Set Engines
Piston and Rings
3054 and 3056 Marine Generator Sets
Maintenance Interval Schedule - 3056 Turbocharged Marine Generator Set Engine
3054 and 3056 Marine Generator Sets
Maintenance Interval Schedule - 3054 Turbocharged Marine Generator Set Engine
C15 and C18 Engines for Caterpillar Built Machines
Fuel System
390F MHPU Mobile Hydraulic Power Unit
Cooling System Coolant Sample (Level 1) - Obtain
390F MHPU Mobile Hydraulic Power Unit
Engine Oil Level - Check
C27 and C32 Industrial and Petroleum Engines
Flywheel Housing
12M, 140M, 160M, 140, 150 and 160 Motor Graders Hydraulic and Steering System
Hydraulic Tank
C15 and C18 Engines for Caterpillar Built Machines
Fuel Transfer Pump - Remove
C32 Commercial Engines
Heat Exchanger
3508C, 3512C and 3516C Marine Engines
Water Pump - Disassemble
3508C, 3512C and 3516C Marine Engines
Water Pump - Assemble
C27 and C32 Generator Set Engines
Electronic Unit Injector - Remove
C15 and C18 Engines for Caterpillar Built Machines
Electronic Unit Injector - Install
C27 and C32 Generator Set Engines
Electronic Unit Injector Sleeve - Remove