Crankshaft
`
C27 and C32 Engines for Caterpillar Built Machines
[SENR9936]
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Liner
C27 and C32 Engines for Caterpillar Built Machines
Fuel Transfer Pump
Show/hide table
| |
| Illustration 1 | g01584474 |
|
Typical example (3) Main bearing journal (4) Connecting rod bearing journal | |
Show/hide table
| |
| Illustration 2 | g01585653 |
|
View B-B | |
Show/hide table
| Specification for 224-3250 Crankshaft Gp and 225-6052 Crankshaft Gp | |||
| Item | Qty | Part | Specification Description |
| Refer to Specifications, "Connecting Rod and Main Bearing Journals" for more information about the crankshaft journals. | |||
| For the correct procedure of measuring for a bent crankshaft, refer to the Guideline for Reusable Parts and Salvage Operations, SEBF8054, "Procedure to Measure and Straighten Bent Crankshafts". | |||
| 1 | 2 | 253-1752 Thrust Plate | Install the thrust plates (1) on the center main bearing journal of the crankshaft only. |
| Thickness is |
|||
| 2 | 1 | 223-9135 Crankshaft Gear | The crankshaft gear must be installed on the crankshaft with the timing mark "V" on the outside of the crankshaft gear. |
| A | 1 | 4N-0684 Dowel | Maximum protrusion of the dowel from the face of the crankshaft is |
| C | End play with new thrust plates is Maximum end play with used thrust plates is |
||
| D | 1 | 7S-5005 Dowel | Protrusion of the dowel from the surface of the crankshaft is |
Information System:
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Liner
2004/11/01
Improved Turbocharger Groups {1052}
C12 Marine Engines
Valve Mechanism Cover Base - Remove and Install
3126B Petroleum Engine
Cooling System - Check - Overheating
3508C, 3512C and 3516C Marine Engines
Engine Oil Filter Housing - Assemble
3508C, 3512C and 3516C Marine Engines
Engine Oil Filter Housing - Disassemble
C12 Marine Engines
Marine Transmission Oil Cooler - Remove and Install
345C MHPU Mobile Hydraulic Power Unit Hydraulic System
Solenoid Valve (Proportional Reducing) - Power Shift System
C27 and C32 Industrial and Petroleum Engines
Exhaust Manifold
3508C, 3512C and 3516C Marine Engines
Engine Oil Filter Housing - Install
3508C, 3512C and 3516C Marine Engines
Engine Oil Filter Housing - Remove
345C MHPU Mobile Hydraulic Power Unit Hydraulic System
Accumulator (Pilot)
3508B, 3512B and 3516B Generator Set Engines
Air Inlet Manifold - Remove and Install
3054 and 3056 Marine Generator Sets
Maintenance Interval Schedule - 3054 Turbocharged Marine Generator Set Engine
3054 and 3056 Marine Generator Sets
Maintenance Interval Schedule - 3056 Turbocharged Marine Generator Set Engine
C27 and C32 Generator Set Engines
Piston and Rings
320D Excavator
Boom, Stick and Bucket Operation
C0.5 and C0.7 Industrial Engines
Engine Starting
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines
General Information
345C MHPU Mobile Hydraulic Power Unit Hydraulic System
Pilot Valve (Joystick)
3500 Engines
Water Pump - Remove
3500 Engines
Water Pump - Install
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines
Features
12M, 140, 140M, 150, 160M and 160 Motor Graders Hydraulic and Steering System
Blade Cushion - If Equipped