Cylinder Liner
`
C27 and C32 Engines for Caterpillar Built Machines
[SENR9936]
C27 and C32 Engines for Caterpillar Built Machines
Piston and Rings - C27 Engines
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft
Show/hide table
| |
| Illustration 1 | g03408783 |
Show/hide table
| Specification for the 253-8766 Cylinder Block Liner, 215-2985 Cylinder Block Liner, and 322-1126 Cylinder Block Liner | |||
| Item | Qty | Part | Specification Description |
| A | - | - | New liner bore is |
| B | - | - | Thickness of flange on liner is The minimum thickness of the part that can be used again is |
| Use the following procedure for installing the cylinder liner into the cylinder block:
1. Apply 5P-3975 Rubber Lubricant on the surfaces of the cylinder liner bore. Apply 5P-3975 Rubber Lubricant on the rubber seals on the lower part of the cylinder liner. 2. Put filler band (1) completely in clean engine oil for a moment. 3. Install the filler band in the groove under the liner flange without delay. 4. Install the liner in the bore immediately, before the filler band expands. |
|||
| Refer to Guideline For Reusable Parts, SEBF8068, "Cylinder Liners" for more information. Also, refer to Testing and Adjusting, "Cylinder Liner Projection - Inspect" for the procedure for inspecting the projection of the cylinder liners. | |||
Information System:
2004/11/01
Improved Turbocharger Groups {1052}
C12 Marine Engines
Valve Mechanism Cover Base - Remove and Install
3126B Petroleum Engine
Cooling System - Check - Overheating
3508C, 3512C and 3516C Marine Engines
Engine Oil Filter Housing - Assemble
3508C, 3512C and 3516C Marine Engines
Engine Oil Filter Housing - Disassemble
C12 Marine Engines
Marine Transmission Oil Cooler - Remove and Install
345C MHPU Mobile Hydraulic Power Unit Hydraulic System
Solenoid Valve (Proportional Reducing) - Power Shift System
C27 and C32 Industrial and Petroleum Engines
Exhaust Manifold
3508C, 3512C and 3516C Marine Engines
Engine Oil Filter Housing - Install
3508C, 3512C and 3516C Marine Engines
Engine Oil Filter Housing - Remove
345C MHPU Mobile Hydraulic Power Unit Hydraulic System
Accumulator (Pilot)
345C Excavator Hydraulic System
Displacement Change Valve
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft
3508B, 3512B and 3516B Generator Set Engines
Air Inlet Manifold - Remove and Install
3054 and 3056 Marine Generator Sets
Maintenance Interval Schedule - 3054 Turbocharged Marine Generator Set Engine
3054 and 3056 Marine Generator Sets
Maintenance Interval Schedule - 3056 Turbocharged Marine Generator Set Engine
C27 and C32 Generator Set Engines
Piston and Rings
320D Excavator
Boom, Stick and Bucket Operation
C0.5 and C0.7 Industrial Engines
Engine Starting
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines
General Information
345C MHPU Mobile Hydraulic Power Unit Hydraulic System
Pilot Valve (Joystick)
3500 Engines
Water Pump - Remove
3500 Engines
Water Pump - Install
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines
Features