Accessory Drive
`
G3520C and G3520E Engines
[RENR5977]
BASIC ENGINE
DRIVE GP-ACCESSORY
Show/hide table
| |
| Illustration 1 | g03015077 |
Show/hide table
| Specification for 241-6715 Accessory Drive Gp and 268-0055 Accessory Drive Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 1 | 199-2889 Idler Shaft | Diameter is |
| 2 | 1 | 155-2307 Idler Gear As | Bore of 116-1365 Bearing after assembly is |
| 3 | 1 | 7N-5874 Auxiliary Drive Shaft | Diameter is |
| Width of the groove for the thrust washer is |
|||
| 4 | 2 | 7N-5246 Thrust Washer | Thickness is |
| 5 | 4 | - | During assembly, align the hole in the bushing with the adapter assembly. |
| Bore of 127-5400 Bushing after assembly is |
|||
| 6 | 6 | - | Before assembly, lightly lubricate the bore with the fluid that is being sealed. |
| 7 | 2 | 7N-7539 Thrust Washer | Thickness is |
| 8 | 1 | 241-4808 Shaft | Diameter is |
| Width of the groove for the thrust washer is |
|||
Information System:
120M, 12M, 140, 140M, 150, 14M, 160M, 160 and 16M Motor Graders Secondary Steering System
Location of Electrical Components
120M, 12M, 140, 140M, 150, 14M, 160M, 160 and 16M Motor Graders Secondary Steering System
Secondary Steering System
C12 Marine Engines
Cylinder Head - Install
C12 Marine Engines
Cylinder Head - Remove
Field Installation of the 263-8162 Sleeve Kit (INJECTOR){1713}
C12 Marine Engines
Heat Exchanger - Remove
C12 Marine Engines
Engine Oil Filter Base - Assemble
C12 Marine Engines
Engine Oil Filter Base - Disassemble
C6.6 Marine Generator Set EMCP3
General Information
120M, 12M, 140, 140M, 150, 14M, 160M, 160 and 16M Motor Graders Secondary Steering System
Location of Hydraulic Components
C12 Marine Engines
Lifter Group - Remove and Install
EMCP3
System Operation
C6.6 Marine Generator Set
Generator Lead Connections
C12 Marine Engines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
C9 Marine Generator Set
Control Panel - Standard
EMCP3
Engine Overspeed Warning
EMCP3
Engine Underspeed Warning
C6.6 Marine Generator Set
Voltage Regulators
C15 and C18 Industrial Engines
Fuel Temperature Sensor - Remove and Install
C15 and C18 Industrial Engines
Fuel Pressure Sensor - Remove and Install
C9 Industrial Engines
Electronic Control System Components
G3516C and G3516E Gas Engines
Crankcase Breather
Installation Procedure for 257-4183 Injector Wiring Harness Kit {1408}
On-Highway Engines Electronic PTO Installation and Application Guide
PTO Shutdown Timer - Test