G3516C and G3516E Gas Engines Camshaft Caterpillar

Camshaft

`

G3516C and G3516E Gas Engines [KENR6833]

G3516C and G3516E Gas Engines Camshaft

G3516C and G3516E Gas Engines Crankcase Breather

BASIC ENGINE

CAMSHAFT GP

G3516C and G3516E Gas Engines Camshaft

G3516C and G3516E Gas Engines Camshaft

G3516C and G3516E Gas Engines Camshaft

G3500 Engines Camshaft Bearing Position

G3516C and G3516E Gas Engines Camshaft Bearing Position

Show/hide table




Illustration 1	g03053436

Show/hide table

Table 1
Specification for 245-6117 Camshaft Gp
Item	Qty	Part	Specification Description
1	16	5P-0076 Bolt	Torque to 55 ± 7 N·m (41 ± 5 lb ft).
-	-	-	Diameter (A) of camshaft bearing journal is 85.88 ± 0.02 mm (3.381 ± 0.001 inch).
2	1	5B-5821 Dowel	Extension (B) of dowel is 12.0 ± 0.5 mm (0.47 ± 0.02 inch).
3	2	7N-3218 Thrust Washer	Thickness (C) is 8.50 ± 0.05 mm (0.335 ± 0.002 inch). Width of the groove in the camshaft for thrust washer is 8.75 ± 0.05 mm (0.344 ± 0.002 inch).

Show/hide table




Illustration 2	g03053437
245-6119 Camshaft As

Show/hide table




Illustration 3	g03053439
245-6122 Camshaft As

Show/hide table

Table 2
Item	Qty	Part	Specification Description
4	2	4N-1650 Dowel	Extension (D) of dowel is 22.0 ± 0.5 mm (0.87 ± 0.02 inch).

Show/hide table




Illustration 4	g03053440

Show/hide table

Table 3
Item	Qty	Part	Specification Description
-	-	-	Use the following procedure in order to determine the actual camshaft lobe lift (E): 1. Measure camshaft lobe height (F). 2. Measure the base circle (G). 3. Subtract the base circle (G) from the camshaft lobe height (F). The difference is the actual camshaft lobe lift.
-	-	-	Specified camshaft lobe lift (E) for:
			Inlet lobe is 9.201 mm (0.3622 inch).
			Exhaust lobe is 9.901 mm (0.3898 inch).

Information System:

G3520C and G3520E Engines Camshaft

G3516C and G3516E Gas Engines Camshaft

C12 Marine Engines Aftercooler - Remove

G3516C and G3516E Gas Engines Camshaft

C12 Marine Engines Auxiliary Water Pump - Remove

C12 Marine Engines Water Outlet Manifold - Remove

C12 Marine Engines Water Temperature Regulator - Remove and Install

2004/10/01 A New Fuel Transfer Pump is Used {1256}

C12 Marine Engines Water Pump - Assemble

C12 Marine Engines Water Pump - Disassemble

C12 Marine Engines Water Pump - Remove

ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys Specifications

C12 Marine Engines Aftercooler - Install

C12 Marine Engines Expansion Tank - Remove and Install

C12 Marine Engines Flywheel - Remove and Install

C12 Marine Engines Vibration Damper and Pulley - Remove and Install

390F MHPU Mobile Hydraulic Power Unit Cooling System Coolant Extender (ELC) - Add

2004/11/01 New Voltage Regulator for Switchgear Is Now Used {1410}

C12 Marine Engines Valve Mechanism Cover - Remove and Install

C12 Marine Engines Front Cover - Remove

C12 Marine Engines Front Cover - Install

C12 Marine Engines Camshaft - Remove

C12 Marine Engines Camshaft - Install

C12 Marine Engines Engine Oil Pan - Remove and Install