EPC Parts Catalogs

G3516C and G3516E Gas Engines Camshaft Caterpillar


  1. Home
  2. Specifications
  3. #168126
Camshaft
`
G3516C and G3516E Gas Engines [KENR6833]
G3516C and G3516E Gas Engines Camshaft
G3516C and G3516E Gas Engines Camshaft
BASIC ENGINE
CAMSHAFT GP
G3516C and G3516E Gas Engines Camshaft
G3516C and G3516E Gas Engines Camshaft
G3516C and G3516E Gas Engines Camshaft
G3500 Engines Camshaft Bearing Position
G3516C and G3516E Gas Engines Camshaft Bearing Position
Show/hide table
Illustration 1g02981580

Show/hide table
Table 1
Specification for 240-2688 Camshaft Gp and 253-9515 Camshaft Gp 
Item  Qty  Part  Specification Description 
1  16  5P-0076 Bolt  Torque to 55 ± 7 N·m (41 ± 5 lb ft). 
2  2  7N-3218 Thrust Washer  Thickness (D) is 8.50 ± 0.05 mm (0.335 ± 0.002 inch).
Width (A) of the groove in the camshaft is 8.75 ± 0.05 mm (0.344 ± 0.002 inch). 
C  1  5B-5821 Dowel  Extension of dowel is 12.0 ± 0.5 mm (0.47 ± 0.02 inch). 
E  -  -  Diameter of bearing journal is 85.88 ± 0.02 mm (3.381 ± 0.001 inch). 
After installation, bore diameter is 86.15 ± 0.06 mm (3.391 ± 0.002 inch).
F  1  4N-1650 Dowel  Extension of dowel is 22.0 ± 0.5 mm (0.87 ± 0.02 inch). 
Show/hide table
Illustration 2g02981582

Show/hide table
Table 2
Item  Qty  Part  Specification Description 
-  -  -  Use the following procedure in order to determine the actual camshaft lobe lift:
1. Measure camshaft lobe height (H).
2. Measure the base circle (J).
3. Subtract the base circle (J) from the camshaft lobe height (H). The difference is the actual camshaft lobe lift. 
G  -  -  Specified camshaft lobe lift for: 
Inlet lobe is 7.4 mm (0.29 inch).
Exhaust lobe is 9.901 mm (0.3898 inch).

Information System:

C12 Marine Engines Aftercooler - Remove
G3516C and G3516E Gas Engines Camshaft
C12 Marine Engines Auxiliary Water Pump - Remove
C12 Marine Engines Water Outlet Manifold - Remove
C12 Marine Engines Water Temperature Regulator - Remove and Install
2004/10/01 A New Fuel Transfer Pump is Used {1256}
C12 Marine Engines Water Pump - Assemble
C12 Marine Engines Water Pump - Disassemble
C12 Marine Engines Water Pump - Remove
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys Specifications
C13 and C15 Engines for Combat and Tactical Vehicles PTO Shutdown Timer - Test
C13 and C15 Engines for Combat and Tactical Vehicles Output Selections
G3520C and G3520E Engines Camshaft
G3516C and G3516E Gas Engines Camshaft
C12 Marine Engines Aftercooler - Install
C12 Marine Engines Expansion Tank - Remove and Install
C12 Marine Engines Flywheel - Remove and Install
C12 Marine Engines Vibration Damper and Pulley - Remove and Install
390F MHPU Mobile Hydraulic Power Unit Cooling System Coolant Extender (ELC) - Add
2004/11/01 New Voltage Regulator for Switchgear Is Now Used {1410}
C12 Marine Engines Valve Mechanism Cover - Remove and Install
C12 Marine Engines Front Cover - Remove
C12 Marine Engines Front Cover - Install
C12 Marine Engines Camshaft - Remove