Sensors and Electrical Components
`
C4.4 Industrial Engine
[SEBU9065]
ELECTRICAL AND STARTING SYSTEM
ELECTRONICS GP-ENGINE
The illustrations within the following sections are typical location of the sensors or electrical components for an industrial engine. Specific engines may appear different due to differences in applications.
Show/hide table
| |
| Illustration 1 | g03470316 |
|
Typical example (1) Coolant Temperature Sensor (2) Inlet Manifold Pressure Sensor (3) Bus Bar for Glow Plugs (4) Connector for Injectors 1 and Injector 2 (5) Connector for Injectors 3 and Injector 4 (6) Inlet Manifold Temperature Sensor (7) Fuel Rail Pressure Sensor (8) Diagnostic Connector | |
Show/hide table
| |
| Illustration 2 | g03470317 |
|
Typical example (9) Electronic Control Module (10) Primary Speed/Timing sensor (11) Oil Pressure Sensor (12) Secondary Speed/Timing sensor (13) Solenoid for the high-pressure fuel pump | |
Show/hide table
| |
| Illustration 3 | g03470356 |
|
Typical example (14) Alternator (15) Starting Motor and solenoid (16) Water in Fuel Switch (17) Electric Fuel Pump/Priming Pump | |
Show/hide table
| |
| Illustration 4 | g03471916 |
|
Typical example (1) Coolant Temperature Sensor (2) Inlet Manifold Pressure Sensor (3) Bus Bar for Glow Plugs (4) Connector for Injectors 1 and Injector 2 (5) Connector for Injectors 3 and Injector 4 (6) Inlet Manifold Temperature Sensor | |
Show/hide table
| |
| Illustration 5 | g03471957 |
|
Typical example (7) Fuel Rail Pressure Sensor (8) Diagnostic Connector (9) Electronic Control Module (10) Primary Speed/Timing sensor (11) Oil Pressure Sensor (12) Secondary Speed/Timing sensor (13) Solenoid for the high-pressure fuel pump | |
Show/hide table
| |
| Illustration 6 | g03474458 |
|
Typical example (14) Alternator (15) Starting Motor and solenoid (16) Water in Fuel Switch (17) Electric Fuel Pump/Priming Pump | |
Information System:
C15 Petroleum Engine
Product Description
C280-08 Marine Engine
Fluid Recommendations
C280-08 Marine Engine
Refill Capacities
C280-08 Marine Engine
Product Lifting
C280-08 Marine Engine
Product Description
2013/10/10
An Improved Bearing Setting Procedure for Transfer Gears is Now Used on Certain CX31-P600 Petroleum Transmissions {3159}
Installation Procedure for Product Link PL421 Retrofit {7606}
Removal Procedures for Diesel Exhaust Fluid (DEF) Connectors {108K}
C280-08 Marine Engine
Safety Messages
C280-08 Marine Engine
Model View Illustrations
2013/11/13
New Terminal Block Labels for the AC/DC Control Boxes and Wall Mount Panels on Global Design Generator {1408, 4490, 7451}
C13 and C15 Generator Sets
Electronic Modular Control Panel 4 (EMCP 4)
C280-08 Marine Engine
Engine Oil - Change
C7.1 Industrial Engine
Turbocharger Exhaust Temperature Sensor - Remove and Install
CX31-P600 Petroleum Transmission
Transmission Control
C280-12 Marine Engine
Safety Messages
C280-12 Marine Engine
Model View Illustrations
C280-12 Marine Engine
Product Lifting
2013/10/11
New Engine Monitoring System III Software Is Used on Certain 3500 Generator Set Engines {1901, 1920}
G3306B Petroleum Generator Set Engines
Electronic Control Module (ECM)
G3306B Petroleum Generator Set Engines
Diagnostic Trouble Codes
G3306B Petroleum Generator Set Engines
Gas Pressure - Check and Adjust
Installation of Improved Relays for the Power Distribution Panel Used on Certain 3500 Marine Engines{4493, 7451, 7490}
CX31-P600 Petroleum Transmission
Speed Sensor (Transmission)