C280-08 Marine Engine Model View Illustrations Caterpillar

Model View Illustrations

The illustrations show various typical features of a Cat C280-8 Marine Engine and aftertreatment. The illustrations do not show all of the engine configurations that are available.

Illustration 1g03468399

C280-8 Engine Right Side

(1) Crankcase breathers

(2) Oil cooler

(3) Water pump

(4) Prelube pump

(5) Oil drain

(6) Oil filters

(7) Explosion relief valves

(8) Oil mist detector

(9) Power distribution panel

(10) Control panel

Illustration 2g03468402

C280-8 Engine Left Side

(11) Turbocharger

(12) Flywheel

(13) Air shutoff

(14) Air starting motor

(15) Aftercooler

(16) Centrifugal oil filters

(17) Oil filler

(18) Oil level gauge

Illustration 3g03573896

Dosing Control Cabinet

(1) Service tool connector

(2) Electrical harness connection to engine ECM

(3) Electrical harness connection to DEF tank

(4) Electrical harness connection from CEM to dosing cabinet

(5) DEF vent port

(6) 120 V AC source

(7) DEF outlet to CEM

(8) DEF inlet/strainer

(9) Grounding stud

(10) Air outlet to CEM

(11) Air inlet/strainer

(12) Circuit breaker

Illustration 4g03576200

SCR Reactor Housing

(1) Reactor housing

(2) Lifting eyes

(3) Exhaust outlet

(4) Exhaust outlet NOx and temperature sensors

(5) SCR catalysts

(6) SCR catalyst access hatch

(7) Mounting feet

(8) Inlet temperature sensor

(9) Exhaust outlet NOx sensor

(10) Exhaust outlet temperature sensor

Illustration 5g03521539

Mixing Tube

(1) NOx sensor

(2) Exhaust Temperature sensor

(3) DEF lance

(4) Mixer assembly

(5) Tube

Information System:

2013/11/13 New Terminal Block Labels for the AC/DC Control Boxes and Wall Mount Panels on Global Design Generator {1408, 4490, 7451}
C13 and C15 Generator Sets Electronic Modular Control Panel 4 (EMCP 4)
C280-08 Marine Engine Maintenance Interval Schedule
C15 Petroleum Engine Coolant Sample (Level 1) - Obtain
C8.7 Marine Engine Product Storage
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
C15 Petroleum Engine Fluid Recommendations
C15 Petroleum Engine Refill Capacities
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
C15 Petroleum Engine Monitoring System
UPS 750 Uninterruptible Power Supply Abbreviations and Acronyms
C15 Petroleum Engine Gauges and Indicators
C280-08 Marine Engine Safety Messages
Removal Procedures for Diesel Exhaust Fluid (DEF) Connectors {108K}
Installation Procedure for Product Link PL421 Retrofit {7606}
2013/10/10 An Improved Bearing Setting Procedure for Transfer Gears is Now Used on Certain CX31-P600 Petroleum Transmissions {3159}
C280-08 Marine Engine Product Description
C280-08 Marine Engine Product Lifting
C280-08 Marine Engine Refill Capacities
C280-08 Marine Engine Fluid Recommendations
C15 Petroleum Engine Product Description
C4.4 Industrial Engine Sensors and Electrical Components
C280-08 Marine Engine Engine Oil - Change
C7.1 Industrial Engine Turbocharger Exhaust Temperature Sensor - Remove and Install