C8.7 Marine Engine Safety Messages Caterpillar


Safety Messages
`
1.1. Universal Warning (1)
2.1. Hot Surface (2)
3.1. Ether Starting Aid (3)
4.1. Hot Coolant Under Pressure (4)



Illustration 1g03464040



Illustration 2g03464041

Universal Warning (1)

These messages are located on the right and left sides of the engine.



g01125097

------ WARNING! ------

Do not operate or work on this engine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any AVSpare dealer for replacement manuals. Proper care is your responsibility.

----------------------

Hot Surface (2)

This message is located on the right and left sides of the engine.



g01372256

------ WARNING! ------

Hot parts or hot components can cause burns or personal injury. Do not allow hot parts or components to contact your skin. Use protective clothing or protective equipment to protect your skin.

----------------------

Ether Starting Aid (3)

These messages are located on the air cleaner or air cleaner cover.



g01055438

------ WARNING! ------

Do not use ether. This machine is equipped with glow plugs. Using ether can create explosions or fires that can cause personal injury or death. Read and follow the engine starting procedure in the Operation and Maintenance Manual.

----------------------

Hot Coolant Under Pressure (4)

These messages are located on top of the expansion tank.



g01053324

------ WARNING! ------

Pressurized system! Hot coolant can cause serious burns, injury or death. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure. Read and understand the Operation and Maintenance Manual before performing any cooling system maintenance.

----------------------

Information System:

2013/10/03 New Software for the Turbocharger Protection Strategy on C7.1 Engines {1052, 1901, 1920}
316F Excavator Operator Controls
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
UPS 750 Uninterruptible Power Supply System Overview
C175-16 Engine Maintenance Interval Schedule
CX31-P600 Petroleum Transmission Transmission Hydraulic Control
C12.9 Marine Engines Fuel System Primary Filter (Water Separator) Element - Replace
793F, 793F CMD Off-Highway Truck Braking System Control Valve (Brake) - If Equipped
793F, 793F CMD Off-Highway Truck Braking System Control Valve (Brake) - If Equipped
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
C15 and C18 Engines for Caterpillar Built Machines Injector Trim File - Install
3512E Tier 4 Final Engines for Land Electric Drilling Fuel Temperature Is High
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Sensor Supply - Test
C11 and C13 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
C15 Petroleum Engine Gauges and Indicators
UPS 750 Uninterruptible Power Supply Abbreviations and Acronyms
C15 Petroleum Engine Monitoring System
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
C15 Petroleum Engine Refill Capacities
C15 Petroleum Engine Fluid Recommendations
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
C8.7 Marine Engine Product Storage
C15 Petroleum Engine Coolant Sample (Level 1) - Obtain