Refill Capacities
`
C8.7 Marine Engine
[SEBU9219]
COOLING SYSTEM
3116 and 3126 Marine Engines
Coolant Extender (ELC) - Add
C8.7 Marine Engine
Refill Capacities
C8.7 Marine Engine
Zinc Rods - Inspect/Replace
C8.7 Marine Engine
Coolant - Change
C8.7 Marine Engine
System Pressure Release
C8.7 Marine Engine
Coolant Sample (Level 1) - Obtain
C8.7 Marine Engine
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
1.1. Lubricant Capacity
2.1. Coolant Capacity
Lubricant Capacity
The capacity of the engine lubrication system includes the capacity of the oil filters that are installed at the factory. Auxiliary oil filter systems (if equipped) will require additional oil. Refer to the specifications that are provided by the OEM of the auxiliary oil filter system.
Show/hide table
| C8.7 Marine Engine Lubricant Refill Capacities | ||
|---|---|---|
| Compartment or System | Liters | Gallons |
| Engine Crankcase with Standard Sump (1) | 34 | 8.8 |
Show/hide table
| ( 1 ) | These values are the approximate capacities for the crankcase oil sump which include the standard oil filters that are installed at the factory. Engines with auxiliary oil filters will require additional oil. Refer to the OEM specifications for the capacity of the auxiliary oil filter. |
Coolant Capacity
To maintain the cooling system, the total cooling system capacity must be determined. The total cooling system capacity will vary between individual installations. The total cooling system capacity can include the following components: engine, expansion tank, heat exchanger and piping.
Refer to the specifications that are provided by AVSpare or the OEM of the installation. Record the total cooling system capacity in the appropriate Table.
Show/hide table
| C8.7 Marine Engine Refill Capacities | ||
|---|---|---|
| Compartment or System | Liters | Gallons |
| Engine and Expansion Tank (1) | 41 | 10.6 |
Show/hide table
| ( 1 ) | The following capacities are for engines that have expansion tanks that are installed in the factory. Cooling systems which are installed by the OEM for the vessel may differ. Refer to the OEM specifications. |
Information System:
C8.7 Marine Engine
Product Description
3600 and C280 Diesel Engine Fluids Recommendations
Contamination Control
C8.7 Marine Engine
Model View Illustrations
14L Motor Grader
Rear Axle, Differential and Final Drive - Remove
14L Motor Grader
Rear Axle, Differential and Final Drive - Install
14L Motor Grader
Gear Pump (Transmission Charging and Scavenge) - Install
14L Motor Grader
Rear Axle, Differential and Final Drive - Disassemble
14L Motor Grader
Gear Pump (Transmission Charging and Scavenge) - Remove
12M Series 3, 140, 140M Series 3, 150, 160M Series 3 and and 160 Motor Graders Power Train
Rear Axle, Differential and Final Drive - Assemble
TA2 Inspection for C7.1 Industrial Engine{0372, 1000, 7000, 753T, 7565}
C9, C13, C15 and and C18 Generator Sets
Voltage Regulators
C8.7 Marine Engine
Heat Exchanger - Clean/Test
C15 and C18 Engines for Caterpillar Built Machines
Injector Trim File - Install
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
793F, 793F CMD Off-Highway Truck Braking System
Control Valve (Brake) - If Equipped
793F, 793F CMD Off-Highway Truck Braking System
Control Valve (Brake) - If Equipped
C12.9 Marine Engines
Fuel System Primary Filter (Water Separator) Element - Replace
CX31-P600 Petroleum Transmission
Transmission Hydraulic Control
C175-16 Engine
Maintenance Interval Schedule
UPS 750 Uninterruptible Power Supply
System Overview
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
316F Excavator
Operator Controls
2013/10/03
New Software for the Turbocharger Protection Strategy on C7.1 Engines {1052, 1901, 1920}