 |
|
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately. |
| NOTICE |
|---|
|
Use a suitable container to catch any fuel that might spill. Clean up any spilled fuel immediately. |
| NOTICE |
|---|
|
Do not allow dirt to enter the fuel system. Thoroughly clean the area around a fuel system component that will be disconnected. Fit a suitable cover over disconnected fuel system component. |
| |
| Illustration 1 | g03479717 |
- Attach a suitable drain hose to the drain valve.
- Open drain valve (1).
- Drain the liquid until diesel fuel is detected.
Show/hide table
NOTICE The water separator is under suction during normal engine operation. Ensure that the drain valve is tightened securely to help prevent air from entering the fuel system.
- Tighten the drain valve.
Fuel System Primary Filter/Water Separator - Drain, complete.