Engine Crankcase Breather - Replace
`
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
[SEBU7605]
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Alternator and Fan Belts - Inspect/Adjust
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Turbocharger - Inspect - If Equipped
LUBRICATION SYSTEM
BREATHER GP
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Engine Crankcase Breather - Replace
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Loosen the screws (1) and remove the breather cover (2) from the valve mechanism cover.
- Remove the spring (3). Remove the diaphragm and plate (4).
- For turbocharged engines, remove the spacer (5) and the joint (6).
- Clean the vent hole (8) and the cavity (7) in the valve mechanism cover.
Show/hide table
NOTICE Make sure that the components of the breather assembly are installed correctly. Engine damage may occur if the breather assembly is not working correctly.
- For turbocharged engines, install a new joint (6) and the spacer (5).
- Install a new diaphragm and plate (4) for the breather assembly into the cavity (7) of the valve mechanism cover or the spacer (5) for turbocharged engines.
- Install a new spring (3).
- Install the breather cover (2) and the four screws (1). Tighten the screws.
Show/hide table
| |
| Illustration 1 | g01335247 |
|
Typical example (1) Screws for the breather cover (2) Breather cover (3) Spring (4) Diaphragm and plate (5) Spacer for turbocharged engines only (6) Joint for turbocharged engines only (7) Cavity (8) Vent hole | |
Information System:
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Alternator and Fan Belts - Inspect/Adjust
C7 Engines for Caterpillar Built Machines
Fuel Transfer Pump - Install
C7 Engines for Caterpillar Built Machines
Fuel Transfer Pump - Remove
345C Excavator Hydraulic System
Stick Drift Reduction Valve
2004/11/01
New Injectors and New Flash Files are Now in Production {1290, 7620}
SR4 and SR4B Generators and Control Panels
Maintenance Interval Schedule - Standby
SR4 and SR4B Generators and Control Panels
Maintenance Interval Schedule - Standard
325D and 329D Excavators
Engine Starting with Auxiliary Start Receptacle - If Equipped
C32 Marine and Marine Generator Set Engines
Cooling System
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Refill Capacities and Recommendations
C32 Marine and Marine Generator Set Engines
Air Inlet and Exhaust System
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package
Fuel Related Components in Cold Weather
C27 and C32 Engines
Finding Top Center Position for No. 1 Piston
C9 Industrial Engines
Cooling System
2004/12/01
Improved Alignment of a Coolant Tube {1380}
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Turbocharger - Inspect - If Equipped
C32 Marine Engines
Fuel System
3508B, 3512B and 3516B Generator Set Engines
Engine Oil Pan - Remove
3508B, 3512B and 3516B Generator Set Engines
Engine Oil Pan - Install
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Fuel System - Prime
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Fuel System Secondary Filter - Replace
3508B, 3512B and 3516B Generator Set Engines
Crankshaft - Remove
3508B, 3512B and 3516B Generator Set Engines
Crankshaft - Install
3126B Petroleum Engine
Sensors and Electrical Connectors