Engine News Machinery information Caterpillar:
2009/06/08
Improved Hardware Is Used on the Sealing Joint between the Turbocharger and the Exhaust Manifold on Certain 3512B Marine Engines {1052, 1053}
2009/05/25
Turbocharger Compressor Wheel {1052, 1053}
2009/06/08
New Software with Improved Monitoring Is Used on Some 3500 Engines {1901, 1902}
2009/06/22
A New Alternator Bracket and Hardware Are Used on C11 and C13 Engines {1405}
2009/04/13
Do Not Adjust the Desired Speed During a Normal Stop for a Gas Engine with an ADEM 3 Control Module {1901, 1920}
2009/04/13
New Software Is Available for C18 Marine Engines {1901, 1920}
2009/05/11
A New Wiring Harness for the Space Heater Is Used {1408, 664E}
2009/03/23
New Water Lines Groups Are Used for Venting of the Separate Circuit Aftercooler (SCAC) {1353, 1380}
2009/03/30
Discoloration of Diesel Fuel {1000, 1250, 1280}
2009/06/29
New Exhaust Bellows Are Used on a 3516B Locomotive Engine {1059}
2009/02/23
Injectors Should Not Be Tested for Proper Operation Prior to Being Installed Into the Engine {1251, 1290}
2009/02/16
Fuel Priming Pump {1258, 1260}
2009/02/09
Improved Fuel Transfer Pump {1256}
2009/04/06
New Software Is Available for C18 Marine Engines {1901, 1920}
2009/03/30
Introduction of a New Fuel Filter Base {1260, 1261}
2009/03/02
Pressure Requirements for the Fuel Supply of the C175 Engine {1250}
2009/02/09
A New Rocker Arm Assembly Is Available {1123}
2009/02/02
Shims Are Now Used in the Carburetors of G3516 Engines {1266}
2009/02/02
A New Seal Is Used for the Ignition Transformers inG3600 Engines {1550, 7555}
2009/02/02
Cap Kits Are Available for Servicing the C175 Fuel System {0663}
2009/02/09
A New Connecting Rod Bearing is Available {1218, 1219, 1225}
2009/01/26
Pushrods {1102, 1121, 1123, 1209}
2009/01/26
Adjustment of the Circuit Breaker Is Required During Setup of Generator Set {1420}
2009/01/05
Rocker Assembly Seals {1100, 1107, 1123}
2009/01/05
A New Connecting Rod Bearing is Available for Certain Commercial Engines {1219, 1225}
Truck Engine News