Engine News Machinery information Caterpillar:
2010/02/03
A Long Term Storage and Recovery Procedure Is Now Available for Certain Commercial Engines {1000}
2010/03/12
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on Certain Engines {1124, 1201, 7555}
2010/01/25
A New Instruction for the Improved Monitoring of Low Coolant Temperature (LCT) is Now Available on Certain C3.3 and C3.4 Products {4490, 7420}
2010/01/28
A New Seal Kit Is Used on G3500C and G3500E Aftercoolers {1063, 7555}
2010/01/08
Correct Usage of Seals and Spacers on the Valve Mechanism Covers of Some C9 Engines {1107, 7555}
2010/01/08
Fuel Injection Pump Gear on 3054C, C3.3, C6.6, C4.4 and C4.4 (Mech) Engines {1251}
2010/01/25
Installing Orifice Plates in some G3520C Landfill Engines {1063, 1380}
2009/12/03
Gasket for the Water Pump on 3054C, 3054E, C4.4 and C6.6 Engines {1361, 1395, 7555}
2009/12/01
A New Heat Shield Is Available for Some C18 Engines {1067}
2010/11/22
Improved Servicing is Available for the Fuel Injection Pump for C6.6 and C4.4 Engines {1251, 1256, 1290, 1714}
2010/03/02
An Improved Water Line Is Used and Available on Certain Commercial Engines and Pleasure Craft {1355, 1380, 1393}
2009/12/16
New Oil Level Gauges Are Used on Some 3516B Locomotive Engines {1326}
2009/11/10
Engine Oil Pan on C6.6 Engines {1302}
2009/10/23
Improved Assembly for the Alternator Bracket on 3054C, 3054E and C4.4Engines {1405}
2010/01/08
Warranty Claims for Turbocharger Gaskets on Certain Marine Engines {1061}
2010/03/22
New Heat Shields Are Used on G3520C Engines {1067, 1408}
2010/03/02
New High Pressure Fuel Line for Certain C6.6 Engines {1251, 1290}
2009/09/28
Improved Turbocharger on C4.4 Engines {1052, 1053}
2009/09/30
Water Pump Operation {1361, 7555}
2009/10/29
Improved Gaskets for the Oil Filter Base Are Now Used on Certain Engines {1306, 1308, 7555}
2009/10/05
A New Exhaust Manifold Shield Is Used on C175 Engines {1067}
2009/10/12
An Improved Fuel System Is Now Used on Certain C27 and C32 Engines {1250, 1256, 1262, 1901, 1920}
2009/09/07
Improved Engine Software for 1800 RPM 3516B Generator Sets that Use an ADEM 3 Electronic Control Module (ECM) {1901, 1920}
2009/09/21
A New Hose Assembly Is Used on Some C175-16 Engines {1307, 1308}
2009/08/24
Radiator {1353}
Truck Engine News