A New Gasket for the SOGAV Is Now Used on Certain Dynamic Gas Blended Engines {1274, 1702}
[M0122211]
FUEL SYSTEM
LINES GP-FUEL
A New Gasket for the SOGAV Is Now Used on Certain Dynamic Gas Blended Engines {1274, 1702}
- Engine
- 3512E (S/N: SK31-UP; NG41-148; NG51-227; SK51-UP)
Description Of Change: The new gasket used has a silicone beading to improve sealing and prevent gas leaks.
Adaptable To:
Show/hide table
 |
|
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility. |
Table 1 contains the new and former part numbers for this change.
Show/hide table
| Required Parts | ||||
|---|---|---|---|---|
| Item | Qty | New Part Number | Part Name | Former Part Number(1) |
| 1 | 2 | Plate | ||
| 2 | 4 | Gasket | ||
Show/hide table
| (1) | The former part number listed is for reference only and may differ. |
Information System:
Screen Assembly May Restrict Cooling Air Flow into the Engine Compartment on Certain 313 Excavators {7165}
320 GX Excavator
Window (Front)
320 GX Excavator
Air Conditioner/Cab Heater Filter (Recirculation) - Inspect/Replace
320 GX Excavator
Engine Air Filter Primary and/or Secondary Element - Replace
3516E Engines
Engine Oil Cooler - Install
New Gas Regulator Flange Components Are Now Used on Certain Dynamic Gas Blended Engines {1278, 1715, 1741}
320 GX Excavator
Fuel System Secondary Filter - Replace
320 GX Excavator
Fuel System Primary Filter (Water Separator) Element - Replace
Grease Pressure Switch Location Is Improved on Certain 794 AC, 796 AC, and 798 AC Off-Highway Trucks {7510, 7516, 7540, 79PK, 79PL}
Procedure to Improve Grease Pressure Switch Location on Certain 794 AC, 796 AC, and 798 AC Off-Highway Trucks {7510, 7516, 7540, 79PK, 79PL}
3516E Engines
Engine Oil Cooler - Remove
3516E Engines
Engine Oil Filter Base - Assemble
PM820, PM822, and PM825 Cold Planer
Water Spray System
Important Information on Flashing Lower Version of EC520 Cat</SUP> GRADE Electronic Control Module (ECM) Software is Now Available for Certain Machines {7620}
320 GX Excavator
Joystick Controls
320 GX Excavator
Engine Starting
PM820, PM822, and PM825 Cold Planer
Machine Service Height
320 GX Excavator
Bucket - Remove and Install
320 GX Excavator
Safety Messages
New Hood and Cover Assemblies Are Now Used on Certain 320 to 330 Excavators {7251}
New Engine Software Is Now Used on Certain C175 Generator Set Engines {1920}
320 GX Excavator
Additional Messages
777E Off-Highway Truck
Lifting and Tying Down the Machine
777E Off-Highway Truck
Towing With Inoperable Engine