2014/08/01 A New Oil Screen is Used on the High-Pressure Fuel Pump Adapter on C175 Engines {1151, 1162, 1206} Caterpillar


A New Oil Screen is Used on the High-Pressure Fuel Pump Adapter on C175 Engines {1151, 1162, 1206}
`
2014/08/01 [SEBD9954]
BASIC ENGINE
GEAR GP
2014/08/01 A New Oil Screen is Used on the High-Pressure Fuel Pump Adapter on C175 Engines {1151, 1162, 1206}
Electric Power Generation:
C175-16 (S/N: WYB1-UP)
Engine:
C175-16 (S/N: M6A1-UP; Y3A1-UP; M6B1-UP; WYC1-UP; P6L1-UP; R1X1-UP; 3A91-UP)
C175-20 (S/N: BXR1-UP)
Engine News SEBD9901, 03 October 2013, "A New Oil Screen is Used on the High-Pressure Fuel Pump Adapter on C175 Engines". Disregard the previous article, refer to the article that follows.

Description of Change: A new screen is used on the high-pressure fuel pump drive adapter. The screen filters return oil flow from the high-pressure fuel pump to the front gear train. The screen helps to prevent possible contamination of the engine front gear train from the high-pressure fuel pump gear train.

Adaptable To: The new 459-6534 Screen As replaces the existing 440-4285 Screen As. The new screen assembly is adaptable back to first production of the serial numbers listed above. Refer to Table 2 for the effective serial numbers.




Illustration 1g03454722

(1) 459-6534 Screen As

Table 1
Required Parts    
Qty     Part Number    
1     3P-1156 O-Ring Seal    
1     6V-5553 O-Ring Seal    
1     330-3517 O-Ring Seal    
1     459-6534 Screen As    

Table 2
Effectivity    
S/N:M6A01008-UP    
S/N:M6B01005-UP    
S/N:P6L01063-UP    
S/N:R1X00114-UP    
S/N:WYB01556-UP    
S/N:WYC01003-UP    
S/N:BXR01100-UP    
S/N:Y3A00125-UP    
S/N:3A900135-UP    

Information System:

14L Motor Grader Machine Systems Articulation Cylinder - Remove and Install - Right Side
14L Motor Grader Machine Systems Articulation Cylinder - Remove and Install - Left Side
G3306B Gas Engines Cylinder Liner
G3306B Gas Engines Electric Starting Motor
794 AC Off-Highway Truck Coolant Level - Check
C7 and C9 Industrial Engines Coolant Level Is Low
C15 and C18 Engines for Caterpillar Built Machines ECM Software - Install
C13, C15, and C18 Tier 4 Final Engines Electrical Connectors - Inspect
C15 and C18 Engines for Caterpillar Built Machines Timing - Calibrate
374F and 390F Excavators Tool Control System Switches
2014/12/10 New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With The Product Link PL421 or Product Link PL420 System {7606, 7620}
2013/10/21 New Product Link Software for PL300 Is Now Available for All Cat Products {7606, 7620}
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit CAN Data Link - Test
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Sensor Signal (Analog, Passive) - Test
2013/10/28 A New Outlet Elbow Is Available for Certain Commercial Engines {1307}
2014/12/23 A New Outlet Elbow Is Used on Certain Machine Engines {1307}
C18 Generator Set Refill Capacities
C12.9 Marine Engines Engine Oil and Filter - Change
Disassembly, Assembly, and Installation of the Oil Heater Pumps and Seals for Certain 3600 and C280 Engines{1333}
307, 308, 309 and 310 EXCAVATOR Boom
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
14L Motor Grader Machine Systems Fan and Gear Motor (Hydraulic Fan) - Remove and Install
C12.9 Marine Engines Fuel System Primary Filter/Water Separator - Drain
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}