2014/03/07 Improved Alternator Mounting Groups Are Now Used on Certain C15 and C18 Engines {1154, 1405} Caterpillar


Improved Alternator Mounting Groups Are Now Used on Certain C15 and C18 Engines {1154, 1405}
`
2014/03/07 [SEBD9932]
BASIC ENGINE
MOUNTING GP-ALTERNATOR
2014/03/07 Improved Alternator Mounting Groups Are Now Used on Certain C15 and C18 Engines {1154, 1405}
Industrial Engine:
C-15 (S/N: BEM1-UP)
C15 (S/N: JRE1-UP; MCW1-UP)
C18 (S/N: WJH1-UP; WRH1-UP)
Petroleum Engine:
C15 (S/N: JDK1-UP; JDY1-UP)
C18 (S/N: WJW1-UP; WJY1-UP)

Description of Change: The new engine alternator mounting groups are used to help prevent vibration damage present in the current alternator mounting group design.

Adaptable To: The old and new groups are listed in Table 1

To view the procedures to change to the new alternator mounting groups, refer to Special Instruction, REHS9215, "Procedure to Replace the Current Alternator Mounting Groups with Improved Alternator Mounting Groups on Certain C15 and C18 Engines".

Note: If the engine in question has a support assembly that is not cast iron, the following additional parts will have to be ordered, 6L-7283 Bolt, 7X-0339 Bolt and 9S-8752 Full Nut

Table 1
Old Part Number     New Part Number     Description     Old Group     New Group     Description    
-     437-7746     Mount     -     -     -    
-     444-6549     Rod As     -     -     -    
332-4697     444-6557     Support As     118-3419     449-4904     Alternator Mounting Gp    
9L-5134     444-7009     Rod     270-8444     444-6556     Alternator Mounting Gp    
7E-6879     449-4906     Rod     135-5077     449-4905     Alternator Mounting Gp    
5R-2994     451-8195     Rod     9E-6169     451-7227     Alternator Mounting Gp    
The improved alternator groups are adaptable back to the first production of the listed engines.

The change is effective at the factory with the engine serial numbers that are listed below in Table 2.

Table 2
Serial Numbers Effective at the Factory    
S/N:BEM07172-UP    
S/N:JDK00571-UP    
S/N:JDY00707-UP    
S/N:JRE14640-UP    
S/N:MCW06600-UP    
S/N:WJH09627-UP    
S/N:WJW00297-UP    
S/N:WJY00640-UP    
S/N:WRH05407-UP    

Information System:

14L Motor Grader Machine Systems Steering Control Valve (with Secondary Steering) - Assemble
14L Motor Grader Machine Systems Steering Control Valve (with Secondary Steering) - Disassemble
Cat</SUP> Detect Object Detection Hardware Generation 4 for Small Off Highway Trucks, Motor Graders, Large Wheel Loaders, Large Wheel Dozers and Articulated Trucks Main Screen (with Fleet Onboard)
G3306B Gas Engines Radiator
14L Motor Grader Machine Systems Steering Control Valve (with Secondary Steering) - Install
14L Motor Grader Machine Systems Steering Control Valve (with Secondary Steering) - Remove
349F and 352F Excavators Monitoring System
374F and 390F Excavators Tool Control System System Identification
374F and 390F Excavators Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - Attachment Valves
C175-16 Locomotive Engines Coolant Sample (Level 1) - Obtain
C175-16 Locomotive Engines Coolant (ELC) - Change
CX31 and CX31 HT On-Highway Transmissions Serial Number Plate
C175-16 Locomotive Engines Engine Crankcase Breather - Clean
2013/10/17 Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Commercial Engines {1250, 1251, 1290, 1713}
2013/10/29 Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain On-Highway Truck Engines {1250, 1251, 1290, 1713}
CX31 and CX31 HT On-Highway Transmissions Oil Filter (Transmission) - Replace
C4.4 Industrial Engine Safety Messages
2013/10/11 New Side Cover and Oil Drain System Are Used on Certain 3512C Locomotive Engines {1307}
CX31 and CX31 HT On-Highway Transmissions Transmission Oil - Change
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Diagnostic Trouble Codes
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
CX31 and CX31 HT On-Highway Transmissions Magnetic Screen (Transmission) - Clean
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
2013/10/02 Improved Gear Train Components are Now Used on TH48-E80 Petroleum Transmissions {3064, 3160}