Improved Alignment of a Coolant Tube {1380}
`
2004/12/01
[SEBD9340]
2004/12/01
Hydraulically Fractured Connecting Rods are Now In Production for 3054, 3054B, 3054C, 3054E and 3056E Engines {1218}
2004/12/01
New Ignition Transformers are Used {1561}
COOLING SYSTEM
LINES GP-WATER
2004/12/01
Improved Alignment of a Coolant Tube {1380}
- Engine:
- 3512B (S/N: 2AF1-UP; 3ZW1-UP; PWG1-UP)
Description of Change: The rear tube for the separate circuit aftercooled (SCAC) system is now easier to properly align for industrial applications on engines that are listed above. The design of the tube is improved. A new plate is also now available to improve the alignment of the tube.
Adaptable To: The newly designed 199-5609 Tube is adaptable to all of the above engines. The 257-2007 Plate is now available.
The newly designed tube and the new plate are within the water lines groups in Table 1. The new design of the tube and the plate are effective with the serial numbers that are listed in Table 2.
Show/hide table
 | |
| Illustration 1 | g01123582 |
Top view of the water lines group (1) Tube (2) Plate | |
Show/hide table
| Water Lines Groups |
| 191-8392 |
| 231-6339 |
Show/hide table
| Effective Serial Numbers |
| S/N:2AF00405-UP |
| S/N:3ZW00632-UP |
| S/N:PWG00138-UP |
Information System:
C9 Industrial Engines
Cooling System
C27 and C32 Engines
Finding Top Center Position for No. 1 Piston
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Engine Crankcase Breather - Replace
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Alternator and Fan Belts - Inspect/Adjust
C7 Engines for Caterpillar Built Machines
Fuel Transfer Pump - Install
C7 Engines for Caterpillar Built Machines
Fuel Transfer Pump - Remove
345C Excavator Hydraulic System
Stick Drift Reduction Valve
2004/11/01
New Injectors and New Flash Files are Now in Production {1290, 7620}
SR4 and SR4B Generators and Control Panels
Maintenance Interval Schedule - Standby
SR4 and SR4B Generators and Control Panels
Maintenance Interval Schedule - Standard
325D and 329D Excavators
Engine Starting with Auxiliary Start Receptacle - If Equipped
C32 Marine and Marine Generator Set Engines
Cooling System
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Turbocharger - Inspect - If Equipped
C32 Marine Engines
Fuel System
3508B, 3512B and 3516B Generator Set Engines
Engine Oil Pan - Remove
3508B, 3512B and 3516B Generator Set Engines
Engine Oil Pan - Install
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Fuel System - Prime
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Fuel System Secondary Filter - Replace
3508B, 3512B and 3516B Generator Set Engines
Crankshaft - Remove
3508B, 3512B and 3516B Generator Set Engines
Crankshaft - Install
3126B Petroleum Engine
Sensors and Electrical Connectors
3126B Petroleum Engine
Cooling System
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
3500 and 3500B Engines
Refill Capacities and Recommendations